volvo crankshaft SARASOTA volvo crankshaft volvo 200 tool -- mmk4mkt

Volvo Cam & Crankshaft Tool Kit 515.00

This set is designed to properly Secure and Align
the cam and crankshaftduring R and R of cylinder head assemblies
on (5) and (6) cyl engines.
Set is also for the proper installationof camshaft cover
to the engine head and useful when replacing camshaft seal.
Volvo Reference numbers: 9995454, 9995453,9995451,9995452.
Call me and I will fax you the details.
Applications include 700, 800, 850, 900, 960, C70 Coupe and Conv,
S40, S60, S70, S80, S90, V70 2000, V70XC, XC70, V90, XC90.

Crankshaft Stop 59.50

Crankshaft Stop Original Factory Tool Made in Germany: 4 Cyl. diesel engine (1.9 l and 2.0 l engine, 2 and 4 valve. Fixing the crankshaft in place at the oval crankshaft pulley when adjusting the valve timing TDC marking at 1 oclock. (Use of the oval belt pulley will be gradually introduced).

Service Light Reset Tech Cards 45.50

SERVICE RESET INFO
Service Light Reset Tech Cards
These cards contain procedures for resetting Volvo, BMW, VW, Audi and Mercedes service light reminder/indicators.
Valuable Information you are looking for quickly and easily using these tech cards.
1999 05 VOLVO
1992 95 VOLVO 850
2002 05 VOLVO S60
2005 06 VOLVO 40 & 50
2005 06 VOLVO S60 & S80
Several models do NOT require the use of a special tool to reset the SRI...
You can use the procedures found on these cards.
Easily find Service Light Reset Information for a variety of Models.
Also for some control module , sunroof calibrating.
Great for any Repair Shop.

Crankshaft Wrench 103.50

Crankshaft Wrench 2079 Extension Wrench used for R & R of Front Crankshaft BoltApllicable: VW Audi with 5 Cylinder.80, 90 Quattro, 400, 5000 Quantum

Crankshaft Pulley Tool 84.50

Crankshaft Tool 2084 Counter Holder Used for R & R of Front Crankshaft PulleyApllicable: VW Audi with 5 Cylinder.80, 90 Quattro, 400, 5000 QuantumUsed in conjunction with tool 2079

Oil Seal Arbor 61.50

Arbor (above) used for proper installation of the oil sealon the pulley side of crankshaft.Applicable: Volvo engine B21, B23, B230

Oil Seal Arbor 42.50

Arbor (above) used for the proper installation of oil sealon pulley side of crankshaft. Applicable: Volvo engine B230, B234

Rear Crankshaft Seal Drift 85.50

Rear Crankshaft Seal Drift
Installs flywheel end crankshaft seal.
Applicable: M10, S14, M20, M21, M30, S38, M40, M41, M42, M43, M44, M47, M50, M51, M52

Oil Filter Wrench 14.95

For removing the plastic housing on cartridge type oil filters
found on late model Volvos
Same as Volvo ref. number 999 5679.
Volvo V40, S40, S70, S80, V70, XC70, XC90, S60, 300, 400, C70 Conv
C70 Coupe etc..
Majority of newer Volvo Applications
86mm 16 Flute 3/8 Drive size.

Crankshaft Gear Puller Volkswagen 86.50

Crankshaft Gear Puller for Volkswagen This inexpensive tool solves the problem of removing the crankshaft timing gear, a gear which must be removed when an engine is rebuilt and the main bearings are changed. In operation, this tool simply slips under the gear and with a twist of a wrench the gear is easily removed. The highest quality standards are used in the construction of this tool for years of repair shop service. To prevent damage to the end of the crankshaft, a ball bearing swivel is used, while for strength, the griping shoe is made of forged steel. For use on all type I, II, & III engines 40hp and later.

Crankshaft Socket 35.50

FACTORY TOOL T40058 USED FOR TURNING THE CRANKSHAFT. MADE IN GERMANY

Counter Holder 0.00

3415 USED TO COUNTERHOLD CRANKSHAFT TOOTHED BELT SPROCKET WHEN RENEWING CRANKSHAFT OIL SEAL.
Factory Tool Made in Germany.
Call or email for availability.

Service Off Volvo 79.00

Turn off service and inspection indicator light.

Threaded Pin for T.D.C. 25.00

Locking Pin
TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF
BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6
For installing or removing toothed belt /flywheel drive plate.

Belt Tensioner Release Kit 29.99

V420 Belt Tensioner Release Tool Kit for Volvo
Includes locking pin to ease belt removal and installation.Appl.: Volvo 850 with female square drive in tensioner

Volvo Clutch Tool 6.99

Volvo Clutch Alignment Tool (Diesel D24)Clutch tool is extremely durable long lasting and inexpensive. These tools can be used over and over again.A must for clutch repair shop, clutch specialist, transmission repair shops, automotive stores, school shop classes, clutch resellers, foreign and domestic repair shops.

Timing Belt Tensioner 44.95

Volvo Timing Belt Tensioner Tool with 6mm Hex Adjuster.On the 1998 and later Volvo engines the timing belt tensioner is located down near the bottom of the engine in a hard to reach area. This uniquely designed tool reaches down and rotates the 6mm hex adjuster on the timing belt tensioner so that one technician can easily set the correct tension preload and tighten the lockdown bolt. This unique tool works on all engines 98 and later with the 6mm allen adjuster and includes: 4 Cylinder, 1.9L, 5 Cylinder, 2.3L, 2.4L, 2.5L, 6 Cylinder, 2.8L, 2.9L

Cam Bar and Pin for 2 Valve 139.50

Camshaft TimingTool Set (2)
TOOL REF 3243
Cam/Bar Holder 2 valves per cylinder/
Used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during belt change head assembly work.
Applicable Audi 90 A6 A4  94 97 AFC Engine

TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF
BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6

Please note: 3243 for 2 valves per cylinder. 

Cam Bar and Pin for 2 Valve 139.50

Bar and Pin for 5 Valve 139.50

Camshaft Timing Tool Set (2)
TOOL REF 3391
Cam/Bar Holder
V6 / 5 valves per cylinder/
used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during timing belt change /head assembly work.
Applicable VW Audi V6 5 Valve 1998 2003
Cam/Bar Holder Not Applicable 3.0 2002 4 cam.

TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6Please note: 3391 for 5 valves per cylinder.

Locking Pin Only 9.50
Lock Pin for Diesel 2064 For securing Bosch injection pump sprocket from rotatingduring R&R of cam shaft drive belt. This Pin also assists in locating the general timing position of pump.Applicable: All VW Audi diesel engines. Volvo D24
read more:

Flywheel Lock 22.95
215 Volkswagen Porsche Tool
Flywheel Lockused to secure the crankshaft from rotating during R&R of motor.
Used in conjunction with Engine Holding Fixture P201,
where Flywheel Lock bolts into a machined channel.
All Porsche and VW 6V or 12V, air cooled.Please note: This item is included in the complete kit also.
read more:

Volvo Diagnostic Unit 0.00

PC based program. Runs with Windows 98/ME/2000/NT or XP. Available functions/Fault code read out/Erase fault codes/Real time data/ system information/SRI reset. Service information. Function chains evaluation. Engine management, fuel injection, ignition control. Anti lock break system. Safety restraint system, airbag. Electronic climate control, A/C. Immobilizer, keyless entry, anti theft system. Instrumentation, instrument cluster, combined instrument. Transmission, gearbox, all wheel drive. Free full time technical support. Workshop Community data link connection. Download data direct to on board ECM. (July 2004 availability, estimate) Volvo currently priced at only $3,195.00, include Saab for additional $995. 00, with yearly updates for $595.00.
This system is one of the best values offered to the independent shop owner today.

Volvo Saab Diagnostic Unit 0.00

Cam Locking Plate Only 16.99
Cam Shaft Locking Plate 2065AUsed for securing the cam shaft from rotatingand maintaining correct timing position during R&R of cam shaft drive belt.All VW Audi Diesel and Volvo D24 6 Cylinder 2.4L diesel 1981 86 engines.
read more:

Live Data Hand Held Scanner 2995.00

Tired of HIGH prices on Scanners?
Serious Inquiries email sales@zdmak.com or call Toll Free 877 938 6657
This is the X431 "All in One" Hand held Diagnostic Scanner
Designed for the professional workshop.
Vehicle year coverage 1988 to 2003 Japanese, and European Vehicles.
Features: Reading and Clearing Fault Codes, Live Data, Component Activation & Data Graphing
Built in Printer, Software update via PC and Internet. All software on 1 Compact Flash card.
Mercedes, BMW, Vauxhall, VW/Audi, Toyota/Lexus,Nissan, Honda, Mitsubishi, Mazda, Chrysler, Fiat, Kia, Hyundai, Daewoo, Ford, Volvo, Renault, CitroenNew Volvo, Renault, Daewoo, Fiat,Kia and Hyundai software available now.
More info Here

ASSEMBLY KIT 0.00

USED WHEN ASSEMBLING PTFE CRANKSHAFT SEAL, FLYWHEEL END

End Play Kit 00
This tool has isdesigned to measure the end play movement
of the VW crankshaft without the use of a dial indicator.
All that is necessary is a feeler gauge set and this tool.
With the tool bolted to the end of the case, the feeler guage
measures the gap created by the end play.
The taking of this end measurement is necessary whenever a VW engine is rebuilt
to prevent the rear main bearing from seizing up.
A must for rebuilding one engine or many,
this tool works on all air cooled VW engines and Porsche 912 & 914 models.
read more:

MANDREL 2026 45.90

INSTALL NEEDLE BEARING IN CRANKSHAFT 5 CYLINDER ENGINE

CAM & CRANK TOOLS 127.50

FOR INSTALLATION OF CRANKSHAFT PULLEY INTERMEDIATE SHAFT & CAMSHAFT OIL SEALS.
4 PIECE TOOL SET

Set of 5 with Indicator 123.99
"Grand Master"
Set of 5 Tools
Including Dial Indicator
Plus 3032 Injection Pump Tool
Puller used for the proper extraction of injection pump drive gear.
Applicable: Volvo and VW / Audi diesels Excluding TDI *
PLUS: VA6015 Used for accurate adjustment of Bosch diesel injection pump.
PLUS: 2065A Diesel Camshaft Locking Plate
PLUS: 2064 Pin.
read more:

OIL SEAL TOOL 54.00

LEVER USED REMOVE FRONT CRANKSHAFT OIL SEAL 5 CYL CIS/CIS E& T

CAM TOOL T40049 0.00

Used for turning crankshaft over when removing and installling camshaft timing chain.

SEAL REMOVER 0.00

REMOVER (REPAIR GROUP 13) USED ON CRANKSHAFT SEALS PULLEY SIDE

ASSEMBLY DEVICE 0.00

Assembly Kit
Used for replacing crankshaft PTFE seal on engine control side.

Installation Arbor 39.50

INSTALLATION OF FRONT CRANKSHAFT OIL SEAL ON 4 CYLINDER TURBO DIESEL ENGINE
MADE IN GERMANY

Saab Oil Seal Arbor 114.00

For proper installation of oil seal flywheel side of crankshaft 2.0L 1973 and newer.

Locking Pin 46.95

Locking Pin 115180
For locating crankshaft in ignition TDC position in order to adjust valve timing.
Applicable: M62 (E53 X5)

2 Pins and 2 Plates 103.00

2 Pins and 2 Plates Set of four tools.VW Audi T.D.I. and New Beetle Cam Kit Reference numbers for the two tools on the left are: 3418 and 3359. Tool Set for factory correct and trouble free installations. This is a popular set for Diesel timing of Bosch injection pumps. This set has been developed for aligning the cam shaft with the Diesel pump on 1998 and newer VW models equipped with a T.D.I. engine. This two piece lock plate and alignment pin allows the technician for factory correct and trouble free installations.

Tools on the right side of image are Diesel Lock Plate / Cam Setting Bar Same as Volkswagen ref 2065a Tool used for securing the cam shaft from rotating and maintaining correct timing position engine AAZ during R&R of cam shaft drive belt. Applicable: VW/Audi diesel and Volvo 6 cylinder 2.4L diesel 1981 86 Lock Pin for Diesel (Same as VW tool 2064). Tool used for securing Bosch diesel injection pump sprocket from rotating during R&R of cam shaft drive belt. This Locking Pin also assists in locating the general timing position of pump. Volkswagen Audi diesel and Volvo 6 cylinder 2.4L diesel 1981 86 All 4 tools are High Quality Made in Europe!

Toyota Crank Seal Installer 41.50

For the proper and easy installation of oil sealon pulley side of the crankshaft.Applicable: Most 4 & 6 cylinder Toyota engines

VW428A 154.00

Original Factory Tool 428A USAGE: TO FACILITATE INSTALLATION OF CAMSHAFT AND TIMING GEAR ONTO CRANKSHAFT Made in Germany.

Oil Seal Arbor 115.00

Oil Seal Arbor Pulley Side of crankshaft Porsche 996 and Boxster

LOCATING FIXTURE 69.95

LOCATING FIXTURE USED TO HOLD CRANKSHAFT/VIBRATION DAMPER WHEN ADJUSTING TIMING

T40069 15.99

Original Factory Tool T40069 T.D.C. PIN LOCKING PIN USAGE: Used for securing crankshaft and adjusting valve timing. 6 cyl. engine 2.4 ltr and 3.2 FSI engines. Made in Germany.

Oil Seal Arbor Porsche 141.50

Arbor needed for the proper installation of oil sealon flywheel side of crankshaft. Applicable: Porsche model 911 '78 '94, 928, 944, 968.

BMW Oil Wrench 39.99

Brand New Oil Filter Socket 86mm (16 Point) for BMW 3 Kompact (please check your size needed)
Also Volvo S40, V40 S70 etc..
Drive size 3/8 and outside hex is 27mm.

Long Pattern Hex Set 4 13.50

4 Pc Long Allen Hex Set
Sizes include: 6, 7, 8, and 10mm Hex.
This set works well on several vehicles such as Audi, AMC, BMW,
Honda, Jaguar, Jeep, Saab, Volkswagen and Volvo.
3/8 Drive set of 4

P215 Oil Seal Arbor 113.00

Arbor needed for the proper installation of oil seal on flywheel side of crankshaft.Applicable: Porsche model 911 '65 '77.

Vibration Damper 0.00

VIBRATION DAMPER SUPPORT BRACKET USED FOR ASSEMBLY OF VIBRATION DAMPER AND INSTALLING CRANKSHAFT OIL SEAL. VR6 ENGINE

VIBRATION DAMPER TOOL 0.00

VIBRATION DAMPER SUPPORT BRACKET USED FOR ASSEMBLY OF VIBRATION DAMPER AND INSTALLING CRANKSHAFT OIL SEAL. VR6 ENGINE

You Searched for

volvo crankshaft

Trade Links With ZDMAK