volvo camshaft SARASOTA volvo camshaft volvo crankshaft -- mmk4mkt

Camshaft Pulley Tools 00
Item1485ADescriptionTool for rotating camshaft pulleysSpecificationsProvided with three accessories suiting most vehicles.
read more:

Set of 5 with Indicator 123.99
"Grand Master"
Set of 5 Tools
Including Dial Indicator
Plus 3032 Injection Pump Tool
Puller used for the proper extraction of injection pump drive gear.
Applicable: Volvo and VW / Audi diesels Excluding TDI *
PLUS: VA6015 Used for accurate adjustment of Bosch diesel injection pump.
PLUS: 2065A Diesel Camshaft Locking Plate
PLUS: 2064 Pin.
read more:

Service Light Reset Tech Cards 45.50

SERVICE RESET INFO
Service Light Reset Tech Cards
These cards contain procedures for resetting Volvo, BMW, VW, Audi and Mercedes service light reminder/indicators.
Valuable Information you are looking for quickly and easily using these tech cards.
1999 05 VOLVO
1992 95 VOLVO 850
2002 05 VOLVO S60
2005 06 VOLVO 40 & 50
2005 06 VOLVO S60 & S80
Several models do NOT require the use of a special tool to reset the SRI...
You can use the procedures found on these cards.
Easily find Service Light Reset Information for a variety of Models.
Also for some control module , sunroof calibrating.
Great for any Repair Shop.

Big Mak 126.00
Master Kit
Set of 6 Tools
Including Dial Indicator

Set Includes:
3032 Injection Pump Tool Puller used for the proper extraction of injection pump drive gear. Applicable: Volvo and VW / Audi diesels Excluding TDI
PLUS: VA6015 Holder used for accurate adjustment of Bosch diesel injection pump.
Plus: 2065A Diesel Camshaft Locking Plate Tool
PLUS: 2064 Lock Pin for Diesel.
Plus the Pin Wrench (made in Germany) for easy adjustment of Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes. This wrench with its protruding pins, grabs the center of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment. Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80.
Plus Dial Indicator
read more:

Camshaft Bar 84.50

Camshaft Tool Same as Porsche 9191Cam bar used to secure the camshaftfrom rotating during R&R of camshaft nut. Needed when adjusting valves or setting cam timing 911 (80 89)

Oil Filter Wrench 14.95

For removing the plastic housing on cartridge type oil filters
found on late model Volvos
Same as Volvo ref. number 999 5679.
Volvo V40, S40, S70, S80, V70, XC70, XC90, S60, 300, 400, C70 Conv
C70 Coupe etc..
Majority of newer Volvo Applications
86mm 16 Flute 3/8 Drive size.

CAMSHAFT ALIGNMENT KIT 119.95

CAMSHAFT ALIGNMENT KITBMW3035 Aligns and holds camshaft in place when assembling timing chain.Includes: Blocks and locking pin.This is a set (3) of three tools for the alignment and securing of camshafts.Applicable: M40, M43, M70, M73 BMWFor V 12 engines you must have 2 blocks and the locking pin for this procedure.KIT REF: 113190 (PIN REF: 112300)

Cam Adjustment Pieces Only * from Cam Kit 00

CAMSHAFT ADJUSTMENT TOOL
Same as Volvo 5452
700, 800, 850, 900, 960, C70 Conv, C70 Coupe, S40, S60, S70, S80, S90, V40, V70 2000, V70
Engine:B4164S Engine:B4164S2, Engine:B4184S, Engine:B4184S10, Engine:B4184S2, Engine:B4184

BigMak Timing Kit 196.00

Master Kit
Set of 6 Tools
Including Dial Indicator

Set Includes:
3032 Injection Pump Tool Puller used for the proper extraction of injection pump drive gear. Applicable: Volvo and VW / Audi diesels Excluding TDI
PLUS: VA6015 Holder used for accurate adjustment of Bosch diesel injection pump.
Plus: 2065A Diesel Camshaft Locking Plate Tool
PLUS: 2064 Lock Pin for Diesel.
Plus the Pin Wrench (made in Germany) for easy adjustment of Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes. This wrench with its protruding pins, grabs the center of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment. Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80.
Plus Dial Indicator

Puller, Pin , Plate , Holder , Pin Wrench 146.00

Set of five tools: vw 3032, VA6015 PLUS 2065A PLUS 2064 PLUS 12717
Details:
3032 Injection Pump Tool Puller used for the proper extraction of injection pump drive gear. Applicable: Volvo and VW / Audi diesels Excluding TDI * PLUS: VA6015 Used for accurate adjustment of Bosch diesel injection pump. PLUS: 2065A Diesel Camshaft Locking Plate Tool PLUS: 2064 Lock Pin for Diesel. Plus the Pin Wrench (made in Germany) for easy adjustment of Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes. This wrench with its protruding pins, grabs the center of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment. Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80.

BMW Camshaft and Crank Shaft Alignment 449.50

Camshaft and Crank Shaft Alignment Cylinder Head Assembly BMW V8during R&R of cylinder head assemblies of BMW V8 engines.
Locking Fixture for fixing camshaft in position when adjusting valve timing.
Applicable: BMW Engine M60, M62, M62TU

Pump Tool plus Pin , Plate and Holder 127.99

Set of 4 tools including:3032 Injection Pump ToolPuller used for the proper extraction of injection pump drive gear.Applicable: Volvo and VW / Audi diesels Excluding TDI * PLUS: VA6015 Used for accurate adjustment of Bosch diesel injection pump.PLUS: 2065A Diesel Camshaft Locking Plate Tool PLUS: 2064 Lock Pin for Diesel

CAMSHAFT BAR 0.00

USED FOR LOCKING CAMSHAFT WITHOUT REMOVING CLINDER HEAD COVER. USED ON 4 DIESEL ENGINE.

Service Off Volvo 79.00

Turn off service and inspection indicator light.

Camshaft Locating Fixtures 150.00

Timing tools sold as a set (2) pieces.
Camshaft positioners, number 3341 especially for Audi A8.

Volvo Oil Seal Arbor 113.50

Arbor above used for the proper installation of oil sealon the flywheel side of the crankshaft.Applicable: Volvo engine B21, B23, B230.

MULTIPOINT SOCKET 0.00

Socket used to remove bolts from camshaft chain sprocket/camshaft adjuster.

TDI Cam Tools 148.50
Volkswagen ref: T40001
First number 2510 1
Extractor (Puller)for the camshaft phasing gear with 5 and 6 spokes on 4 resp.
6 cylinder engines TDi, engines V6 and V8,
AUDI A 4, A 6, A 8
Second Item 2510 8 Extraction Hook
for the careful extraction of camshaft phasing gear with 5 spokes on VW/AUDI V8 carburetor engines.
Call if you have questions about this item.
read more:

VR6 Camshaft Alignment Tool 19.99

3268 Camshaft Alignment Volkswagen VR6This is an Original Matra Tool Made in Germany

Camshaft Alignment Kit 95.00

CAMSHAFT ALIGNMENT KITBMW113240 This set is used for proper alignment and securing of BMW cam shaftwhile assembling timing chain.Kit comes with T.D.C. Pin number BMW112 300 (Locking Pin). Applicable: BMW Model M42, M44, M50, M52, M52TU
You will get both items with this purchase (jig and pin).

Toyota Valve Adjustment Tool 19.99

This tool has been designed to allow for easy valve adjustment on most Toyota overhead cam engines using spacer shims for valve adjustment. In operation, the tip of the pliers pushes between the spacer shim and the camshaft as the pliers are squeezed close. This action moves the shim and its valve lifter down from the camshaft lobe.In the down position the separate wedge tool is placed between the valve lifter ledge and the camshaft. This wedge tool then maintains a gap between the shim and the camshaft as the pliers are removed. The spacer shim can then be removed through this gap and replaced with one of the correct thickness.
Works especially well with3S FE and 3S GELC Toyota DOHC.
Toyota number 09248 55040
For Camry, Sienna, Avalon, Solara, Supra, 4Runner, MR2, Previa, Paseo, Tacoma, Tercel, T100, Celica.
Packaged as shown with pliers and spacer wedge.Does not work with Land Cruiser 1993 1997 and Lexus LX400 1994 1997

V8 Camshaft Securing Bar 135.00

V8 Timing Tool T40005
Camshaft Securing Bar Audi A6 / A8
Used for the crucial taskof securing both engine banks, cam shafts at T.D.Cwhen replacing the timing belt.

Belt Tensioner Release Kit 29.99

V420 Belt Tensioner Release Tool Kit for Volvo
Includes locking pin to ease belt removal and installation.Appl.: Volvo 850 with female square drive in tensioner

Nissan Valve Tools 27.99

For overhead camshaft engines using spacer shims.
This unique tool has been designed to allow for easy valve adjustement on all NISSANS, and many other overhead camshaft engines using spacer shims for valveadjustment in operation.

Cam & Crank Alignment Sub Kit 99.95

On Sale
Camshaft and Crank Shaft AlignmentCylinder Head Assembly BMW V8
This sub set is used to properly secure and align the cam and crank shaft
during R&R of cylinder head assemblies.
Locking Fixture for fixing camshaft in position when adjusting valve timing.
Applicable: BMW Engine M60, M62, M62TU
This sub kit is on sale and comes as shown above with the TDC Pin included. (pin number 112300).

Volvo Clutch Tool 6.99

Volvo Clutch Alignment Tool (Diesel D24)Clutch tool is extremely durable long lasting and inexpensive. These tools can be used over and over again.A must for clutch repair shop, clutch specialist, transmission repair shops, automotive stores, school shop classes, clutch resellers, foreign and domestic repair shops.

Toyota Bonus Set 37.99

ZDMAK SPECIAL DEAL
Headbolt tool and Valve tools...
First Item: Valve tool designed to allow for easy valve adjustment on most Toyota overhead cam engines using spacer shims for valve adjustment. In operation, the tip of the pliers pushes between the spacer shim and the camshaft as the pliers are squeezed close. This action moves the shim and its valve lifter down from the camshaft lobe. In the down position the separate wedge tool is placed between the valve lifter ledge and the camshaft. This wedge tool then maintains a gap between the shim and the camshaft as the pliers are removed. The spacer shim can then be removed through this gap and replaced with one of the correct thickness. Works especially well with 3S FE and 3S GELC Toyota DOHC.Toyota number 09248 55040For Camry, Sienna, Avalon, Solara, Supra, 4Runner, MR2, Previa, Paseo, Tacoma, Tercel, T100, Celica.Packaged as shown with pliers and spacer wedge. Does not work with Land Cruiser 1993 1997 and Lexus LX400 1994 199

PLUS * Toyota Headbolt Tool
12 Point (Triple Square) Socket.
This item is called XZN (style) and is very hard to find. 1/2 Drive Socket is 100mm long, for easy access to hard to reach headbolts.

TDI Cam Tools 289.50

Volkswagen ref: T40001
First number 2510 1
Extractor (Puller)for the camshaft phasing gear with 5 and 6 spokes on 4 resp.
6 cylinder engines TDi, engines V6 and V8,
AUDI A 4, A 6, A 8
Second Item 2510 8 Extraction Hook
for the careful extraction of camshaft phasing gear with 5 spokes on VW/AUDI V8 carburetor engines.
Call if you have questions about this item.

Cam Tool Puller 289.50

Timing Belt Tensioner 44.95

Volvo Timing Belt Tensioner Tool with 6mm Hex Adjuster.On the 1998 and later Volvo engines the timing belt tensioner is located down near the bottom of the engine in a hard to reach area. This uniquely designed tool reaches down and rotates the 6mm hex adjuster on the timing belt tensioner so that one technician can easily set the correct tension preload and tighten the lockdown bolt. This unique tool works on all engines 98 and later with the 6mm allen adjuster and includes: 4 Cylinder, 1.9L, 5 Cylinder, 2.3L, 2.4L, 2.5L, 6 Cylinder, 2.8L, 2.9L

Cam Bar for 5 Valve 129.50

Camshaft Timing Tool Securing Bar
TOOL REF 3391
Cam Securing Bar Holder
V6 / 5 valves per cylinder/
used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during timing belt change /head assembly work.
Applicable VW Audi V6 5 Valve 1998 2003
Cam/Bar Holder Not Applicable 3.0 (2002 4 cam)
Please note: 3391 for 5 valves per cylinder.

Oil Seal Installation Bonus Kit 159.50

Universal Asian Oil Seal Installation Bonus Kit
This special kit was designed for the proper installation of crank shaft oil seals, situated within confined areas on most 4, 6 and 8 cyl Toyota, Lexus, Nissan, Mitsubishi, Mazda and Infiniti.Application includes camshaft oil seal installation of Toyota Lexus 2.5L, 2.8L, 3.0L, 3.4L, 4.0L & 4.3L The stepbolts screw into the cam or crankshaft end. The press nut and washer allows for an even pressing force, seating the oil seal into the engine case with ease.

See tool TOY100 for 4 cylinder Asian camshaft oil seal installation. Honda Acura, see tool HO100, HO105, HO115, and HO115 WB.

Toyota / Asian Oil Seal Bonus Kit 159.50

Cam Bar and Pin for 2 Valve 139.50

Camshaft TimingTool Set (2)
TOOL REF 3243
Cam/Bar Holder 2 valves per cylinder/
Used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during belt change head assembly work.
Applicable Audi 90 A6 A4  94 97 AFC Engine

TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF
BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6

Please note: 3243 for 2 valves per cylinder. 

Cam Bar and Pin for 2 Valve 139.50

Cam Bar for 2 Valve 129.50

Camshaft Securing Bar Timing Tool
TOOL REF 3243
Cam/Bar Holder 2 valves per cylinder/
Used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during belt change head assembly work.
Applicable Audi 90 A6 A4 94 97 AFC Engine
Please note: 3243 Securing Bar for2 valves per cylinder.

Bar and Pin for 5 Valve 139.50

Camshaft Timing Tool Set (2)
TOOL REF 3391
Cam/Bar Holder
V6 / 5 valves per cylinder/
used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during timing belt change /head assembly work.
Applicable VW Audi V6 5 Valve 1998 2003
Cam/Bar Holder Not Applicable 3.0 2002 4 cam.

TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6Please note: 3391 for 5 valves per cylinder.

Locking Pin Only 9.50
Lock Pin for Diesel 2064 For securing Bosch injection pump sprocket from rotatingduring R&R of cam shaft drive belt. This Pin also assists in locating the general timing position of pump.Applicable: All VW Audi diesel engines. Volvo D24
read more:

Volvo Diagnostic Unit 0.00

PC based program. Runs with Windows 98/ME/2000/NT or XP. Available functions/Fault code read out/Erase fault codes/Real time data/ system information/SRI reset. Service information. Function chains evaluation. Engine management, fuel injection, ignition control. Anti lock break system. Safety restraint system, airbag. Electronic climate control, A/C. Immobilizer, keyless entry, anti theft system. Instrumentation, instrument cluster, combined instrument. Transmission, gearbox, all wheel drive. Free full time technical support. Workshop Community data link connection. Download data direct to on board ECM. (July 2004 availability, estimate) Volvo currently priced at only $3,195.00, include Saab for additional $995. 00, with yearly updates for $595.00.
This system is one of the best values offered to the independent shop owner today.

Volvo Saab Diagnostic Unit 0.00

Cam Locking Plate Only 16.99
Cam Shaft Locking Plate 2065AUsed for securing the cam shaft from rotatingand maintaining correct timing position during R&R of cam shaft drive belt.All VW Audi Diesel and Volvo D24 6 Cylinder 2.4L diesel 1981 86 engines.
read more:

Live Data Hand Held Scanner 2995.00

Tired of HIGH prices on Scanners?
Serious Inquiries email sales@zdmak.com or call Toll Free 877 938 6657
This is the X431 "All in One" Hand held Diagnostic Scanner
Designed for the professional workshop.
Vehicle year coverage 1988 to 2003 Japanese, and European Vehicles.
Features: Reading and Clearing Fault Codes, Live Data, Component Activation & Data Graphing
Built in Printer, Software update via PC and Internet. All software on 1 Compact Flash card.
Mercedes, BMW, Vauxhall, VW/Audi, Toyota/Lexus,Nissan, Honda, Mitsubishi, Mazda, Chrysler, Fiat, Kia, Hyundai, Daewoo, Ford, Volvo, Renault, CitroenNew Volvo, Renault, Daewoo, Fiat,Kia and Hyundai software available now.
More info Here

Valve Spring Compressor 0.00
Valve spring compressor
. Allows spring compression by releasing the valve from the valve collets without removing the head.
. The tool is fixed to either the camshaft or the head walls by two hooks supplied with it
read more:

2 Pins and 2 Plates 103.00

2 Pins and 2 Plates Set of four tools.VW Audi T.D.I. and New Beetle Cam Kit Reference numbers for the two tools on the left are: 3418 and 3359. Tool Set for factory correct and trouble free installations. This is a popular set for Diesel timing of Bosch injection pumps. This set has been developed for aligning the cam shaft with the Diesel pump on 1998 and newer VW models equipped with a T.D.I. engine. This two piece lock plate and alignment pin allows the technician for factory correct and trouble free installations.

Tools on the right side of image are Diesel Lock Plate / Cam Setting Bar Same as Volkswagen ref 2065a Tool used for securing the cam shaft from rotating and maintaining correct timing position engine AAZ during R&R of cam shaft drive belt. Applicable: VW/Audi diesel and Volvo 6 cylinder 2.4L diesel 1981 86 Lock Pin for Diesel (Same as VW tool 2064). Tool used for securing Bosch diesel injection pump sprocket from rotating during R&R of cam shaft drive belt. This Locking Pin also assists in locating the general timing position of pump. Volkswagen Audi diesel and Volvo 6 cylinder 2.4L diesel 1981 86 All 4 tools are High Quality Made in Europe!

BMW 113260 0.00

Cam Tool for pressing camshaft while releasing and tightening cam bearing caps.

CAM ADJUSTMENT KIT 155.00

LOCATE CAMSHAFT WHEN ADJUSTING TIMING PLEASE CHECK MANUALS FOR NUMBER 3199 BEFORE ORDERING.

CAM ADJUSTMENT KIT 0.00

LOCATE CAMSHAFT WHEN ADJUSTING TIMING PLEASE CHECK MANUALS FOR NUMBER 3199 BEFORE ORDERING.

CAM & CRANK TOOLS 127.50

FOR INSTALLATION OF CRANKSHAFT PULLEY INTERMEDIATE SHAFT & CAMSHAFT OIL SEALS.
4 PIECE TOOL SET

Special Socket 18.99

FACTORY TOOL USED FOR LOOSENING AND TIGHTENING THE CAMSHAFT ADJUSTER SECURING BOLT.
MADE IN GERMANY

Oil Seal Arbor 61.50

Arbor (above) used for proper installation of the oil sealon the pulley side of crankshaft.Applicable: Volvo engine B21, B23, B230

You Searched for

volvo camshaft

Trade Links With ZDMAK