volkswagen golf tdi SARASOTA volkswagen golf tdi volvo forums -- mmk4mkt

Brake Caliper Tool 110.00

T10165 Brake Caliper Tool
The old number for this tool was 3272
(discontinued)
T10165 is the correct current factory number for this tool.
Brand New Tool
Made in Germany.
Some Vehicles include: Beetle 1.8 Turbo
(see your manual for exact year model applications tool number T10165 or old number 3272 same as T10165)
Beetle 4 CYL , Beetle TDI Diesel , Corrado SLC V6 ,
Golf Cabrio IV GL , Golf Cabrio IV GLX , Golf III GL 4 CYL ,
Golf III GTI 4 CYL , Golf III GTI VR6 , Golf III TDI Diesel , Golf IV 4 CYL ,
Golf IV GL 4 CYL , Golf IV GLS 4 CYL, Golf IV GTI 1.8 Turbo ,
Golf IV GTI VR6 AFP , Golf IV TDI Diesel , Golf IV VR6 AFP ,
Jetta III GL 4 CYL , Jetta III GLS 4 CYL , Jetta III GLX VR6 ,
Jetta III TDI Diesel , Jetta IV 1.8 Turbo , Jetta IV GL 4 CYL ,
Jetta IV GLS 4 CYL , Jetta IV GLS VR6 AFP , Jetta IV GLX VR6 AFP,
Jetta IV TDI Diesel , Jetta Wagon 1.8 Turbo , Jetta Wagon 1.9 TDI ALH ,
Jetta Wagon 4 CYL AZG / AVH, Passat TDI Diesel ,
Passat V6 30V AHA / ATQ , PassatTurbo 20V AEB

B90 for Volkswagen and Audi 377.00
Designed to accurately and efficientlyExtract or Install Hubs and Wheel Bearings of spindle assemblies.Applicable: All Front wheel drive VW (Water cooled) and Audifrom early 1970 to present with S.R.W.B. and I.F.S. including A.W.D.Pictures are for reference only. This is the Volkswagen Audi Kit. The Volkswagen kit "only" available below.
read more:

Golf Guard Black 96.99
Golf Guard Delux
. Large capacity: holds bags up to 11" in diameter and drivers up to 46" long . Key Lockable Latches with Protective Rib . Foam padded Interior to Protect Club Heads . Super Tough Wheels . 5 year warranty
Picture is for reference only.
This is the Golf Guard in Black (color).
Also available in Pewter.
Dimensions 49.6" x 14.9" x 16.4"
read more:

Spark Plug Boot Tool 32.99
Spark Plug Boot Tool
Due to restricted space the T10029 will install the spark plug boot properly.
VW and Audi spark plug boots designed to seal and increase contact between the spark plug and spark plug wire.
With the increased seal and location of the boot,
this tool has been made to access and remove the spark plug boot.
Tool is approximately 10 inches (250mm) long.
Used to pull off the spark plug socket...SOME APPLICATIONS INCLUDE: 2.8 2.9L VR6 engines
VW Golf, Corrado and Passat.Also Audi 80, 100, A4, A6 with 2.6 and 2.8L V6 engines.
This is the correct tool for the job.You will most likely find OLD number 3277 or 3277A in your manuals but
T10029 is the CORRECT current Volkswagen Audi Tool number. 3277 is and old number and Volkswagen calls this a SPARK PLUG CONNECTOR TOOL.
read more:

Pin Wrench 37.00

Heavy Duty Tensioner with Handle Grip
Same as Volkswagen number T10020
VW AUDI TENSION PULLEY SPANNER WRENCH This unique tool is for 1998 and later VW and Audi which require spanner wrench adjustments to the timing belt.Details: Special Wrench for adjusting the belt tension on the following: Audi: A6 1.6 (96 and newer) ALZ VW: Polo Classic, Golf, Bora, New Beetle 1.6 (97 ) AEH / AKL / APF / AUR /AVU / AYD Golf, Bora, New Beetle, 2.0 (98 ) AQY / APK

This is the new style Pin wrench with the (offset) angled head, same as the factory tool only this tool is a little longer for leverage with a rubber handle grip for a better feel compared to the smaller version.

Super Duty Pin Wrench 37.00

Radio Removal Set 24.99

Set of Volkswagen Audi Radio Removal Tools Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box.
PLUS * Set Number vw 3316 Radio Removal Tools New Body Style Passat Jetta Golf Please check your manuals for details.
You will get virtually full VOLKSWAGEN coverage with this set
Plus BMW Radio Removal Tool.Pentagon shaped tool with 3 5/8 inches overall length.Applicable: Most BMWs.This Five sided driver is used to release anti theft radio mounts.YOU ALSO GET THE SPECIAL SMALL ALLEN (Right) side of picture FOR NEWER E38 & E39 7 SERIES
Plus * MERCEDES RADIO REMOVAL KEYS FOR NEWER AND OLDER VEHICLES

Golf Guard Pewter 96.99
Golf Guard Delux
. Large capacity: holds bags up to 11" in diameter and drivers up to 46" long . Key Lockable Latches with Protective Rib . Foam padded Interior to Protect Club Heads . Super Tough Wheels . 5 year warranty
This is Pewter color.
Also available in Black.
Dimensions 49.6" x 14.9" x 16.4"
read more:

Spark Plug Boot Tool 24.99

Spark Plug Boot Tool
Due to restricted space the T10029 will install the spark plug boot properly.
VW and Audi spark plug boots designed to seal and increase contact between the spark plug and spark plug wire.
With the increased seal and location of the boot,
this tool has been made to access and remove the spark plug boot.
Tool is approximately 10 inches (250mm) long.
Used to pull off the spark plug socket on 2.8 2.9L VR6 engines
VW Golf, Corrado and Passat.Also Audi 80, 100, A4, A6 with 2.6 and 2.8L V6 engines.
This is the correct tool for the job.You will most likely find OLD number 3277 or 3277A in your manuals but
T10029 is the CORRECT current Volkswagen Audi Tool number. 3277 is and old number and Volkswagen calls this a SPARK PLUG CONNECTOR TOOL.

B90 for Volkswagen Audi 377.00

Designed to accurately and efficientlyExtract or Install Hubs and Wheel Bearings of spindle assemblies.Applicable: All Front wheel drive VW (Water cooled) and Audifrom early 1970 to present with S.R.W.B. and I.F.S. including A.W.D.Pictures are for reference only. This is the Volkswagen Audi Kit. The Volkswagen kit "only" available below.

Complete VW Audi Radio Keys 24.99

Pin Wrench Socket 14.99

VW524Pin Wrench Socket with 1/2" drive.This tool is used for R&R of grooved ring retaining nuton strut tower of front shock absorber. Applicable: This popular tool is used on a wide variety of VW and Audi MK1 golf and GTi , MK2 Golf & GTi 8V and 16VPolos..Audi Coupe..Audi 80 & Audi 90
Also used for adjusting power steering gear on VW Jetta, Golf, GTI.

Clutch Cable Tool 26.00

NUMBER 3151Clutch Cable Fixture Volkswagen Factory Tool Made in GermanyUsed to position the self adjusting clutch cable at transmission during assembly(Self Adjusting Clutch) GOLF JETTA SCIROCCO 1985 and Newer

Volkswagen Door Tool 9.99

T10011Volkswagen Door Tool triple Square 4
This is the correct tool for the job
New Beetle Tool This tool is used for R & R of door handle screws.Applicable: 1998 & newer VW Golf, Jetta, Passat & New Beetle....possibly other VW Audi.
This tool is a high quality item you will like.

Die Cast 67 Beetle 29.99
1967 Yellow Volkswagen Beetle ... This is a 1:18 scale die cast and plastic reproduction of the 1967 Volkswagen Beetle. The Beetle was considered by most experts as the most desirable of all the Beetles, the 1967 combines the traditional early body design with a larger 1300cc engine and many other mechanical refinements.
read more:

B90 Volkswagen Only 314.00

This is a Volkswagen Kit only. Designed to accurately and efficientlyExtract or Install Hubs and Wheel Bearings of spindle assemblies. No Audi Components in this kit.

Volkswagen Only 314.00

This is a Volkswagen Kit only. Designed to accurately and efficientlyExtract or Install Hubs and Wheel Bearings of spindle assemblies. No Audi Components in this kit.

Volkswagen Only B90 314.00

This is a Volkswagen Kit only.
Designed to accurately and efficientlyExtract or Install Hubs and Wheel Bearings of spindle assemblies. No Audi Components in this kit.

Chain Adjuster 24.50

3366CHAIN ADJUSTER Required to change the troublesome cam adjuster seal
Audi and Volkswagen 4, 6 (2.7 and 2.8) and 8 CylWith 5 Valve per Cyl.
Also Audi VW 1.8 Golf Jetta Passat New Beetle
Note:The manual says to remove both camshafts to change the seal ...
but using this tool you can relieve the tension on the camshaft chainand lift it up far enough to clean, remove and replace the gasket and seal.
This procedure not only saves time but saves any other damagethat may happen to camshafts and bearings by removing them.
ORIGINAL MATRA FACTORY TOOL MADE IN GERMANY

Die Cast 67 Beetle Red 29.99
1967 Red Volkswagen Beetle ... This is a 1:18 scale die cast and plastic reproduction of the 1967 Volkswagen Beetle. The Beetle was considered by most experts as the most desirable of all the Beetles, the 1967 combines the traditional early body design with a larger 1300cc engine and many other mechanical refinements. This reproduction model has, opening hood, opening doors, opening trunk, adjustable front wheels, workable steering, spare tire and adjustable seats.
read more:

Brake Tool 25.00

NUMBER 3289Brake Release Tool Volkswagen VR6 JettaTool is used to disconnect brake pedal from booster.This is an Original VW Factory ToolMade in Germany for Volkswagen By Kukko*

Threaded Pin for T.D.C. 25.00

Locking Pin
TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF
BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6
For installing or removing toothed belt /flywheel drive plate.

Valve Tool for Volkswagen 61.95

Valve Tool for Volkswagen Valve Tool for VolkswagenThis unique tool has been designed to allow removal and installation of valve springs while the engine is still in the carType I, II III engines 40 HP and laterThis set will also remove springs on disassembled engines.

Hazet Quality Tools 23.00

Same as Volkswagen V159. This is the original Factory Tool.
This is also the best Quality V159 you will find anywhere.
Pin Wrench for easy adjustment of Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes. This wrench with its protruding pins, grabs the center of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment. Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80.
eg; Double Pin Wrench special steel, burnished,for idler pulley on toothed belt, distance of pins 18 mm,diameter of pins 2.9 mm for deep located idler pulley on toothed belt on1,6 l diesel engine VW van T3 (up to model 1991).

Set 2 Alternator Tools 47.00

Combo Socket Set of 2 consisting of the 17mm Multi Spline Adapter and XZN (12 Point) Socket size M10 for mounting and dismounting the alternator pulley at the generator.Volkswagen Audi Mercedes Porsche etc...For mounting the V belt pulley (slip clutch pulley) at the alternator (manuals call it a generator), especially for T.D.I. VW Golf III, Vento, Passat and AUDI A 3 .
The short serrated socket (3400) is size 17MM outside diameter and Length is 30mm.
The larger tool is M10 XZN triple square and is 1/2 drive x 140mm Length.Also for Boxster. (See repair Group 27 (Porsche Bulletins) Boxster Alternators with free wheeling Pulleys. High Quality Tool

Also: 1990 to 1994 porsche C2 and C4 and all porsche 993s use a (M10) 10mm 12point socket tool to hold the alternator shaft when replacing the belts the area between the alternator and car body is very limited a 10mm 12point spanner style wrench works well for this job.

Best Seller ! Radio Tools Set 24.99

This is one of the best sets on the market. This is a Master Set for BMW Mercedes Porsche VW Audi and DIN. Included is a total of 3 different sets Volkswagen Audi, two different tools for BMWand a set for Mercedes Porsche and a DIN Ford set. The VW Tools (4) Number T10057Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box. If you have 4 slots VW AUDI this is the 4 keys you need) Plus you get Number VW 3316 (2) Radio Removal Tools New Body Style Passat Jetta Golf . You will get virtually full coverage forVolkswagen Audi when you buy this master set. The BMW Radio Removal Tools areone Pentagon shaped tool with a 3 5/8 inches overall length. Applicable: Most BMWs. This Five sided driver is used to release anti theft radio mounts.You will also get the special rare small allen tool for BMW (upper left) Fornewer BMW E38 & E39 7 SERIES Plus Mercedes most coverage for newer and oldervehicles, especially 1992 and newer 129, 140, 163, 202 & 210 PLUS Range Rover with Becker Nav System.The MB Tools also work on Porsche. Appl: Turbo GT, GT2, GT3, Boxster, Cayenne 911, 996 , 987, Carrera etc. Same as Porsche ref: 000 721 957 01

Crankshaft Gear Puller Volkswagen 86.50

Crankshaft Gear Puller for Volkswagen This inexpensive tool solves the problem of removing the crankshaft timing gear, a gear which must be removed when an engine is rebuilt and the main bearings are changed. In operation, this tool simply slips under the gear and with a twist of a wrench the gear is easily removed. The highest quality standards are used in the construction of this tool for years of repair shop service. To prevent damage to the end of the crankshaft, a ball bearing swivel is used, while for strength, the griping shoe is made of forged steel. For use on all type I, II, & III engines 40hp and later.

VW428A 49.99
Volkswagen 428a FACTORY TOOL MADE IN GERMANY

In Stock Now!
Call if you need more info on this tool.
read more:

Pin Wrench Set 2 49.00

This is the Best Quality Set of the two CRUCIAL VW Audi Pin Wrenches you will find anywhere.
SUPER HIGH QUALITY TOOLS (BOTH) MADE IN GERMANY BY HAZET.
First item is number V159 (this is a smaller tool on the left side picture is not to scale) This tool is for easy adjustment of Camshaft spur belts
(toothed belt) on idler pulleys with Pin holes. This wrench with its protruding pins, grabs the center
of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment.
Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80
Distance of pins 18 mm, diameter of pins 2.9 mm for deep located idler pulley
on toothed belt on 1,6 l diesel engine VW van T3 (up to model 1991).
V159 is the correct number the old VW Number on this (smaller) tool was 2587.

T10020 Special wrench with an offset (angled) head (Larger tool on right side of image)
This tool also used for adjusting timing belt tension.
99 and later VW Golf, VW Jetta and Beetle with 2.0 Litre Gas and 1.9 Litre TDI Engines.1999 and newer Golf, Jetta
New Beetle with 2.0l gas engine and 1.9l T.D.I. Diesel engine. You will get both tools with this purchase.

Factory Oil Wrench 29.50

Item Number 3417 Original Oil service Wrench 74mm with14 Points (inside flats flutes).
Applications include: Audi, VW Golf, and new body Jetta, TDI (Diesel)
and the following gas vehicles; Passat, Golf and Jetta with 1.8 turbo and 2.0litre,
Rabbit, Dasher, Scirocco, and New Beetle.
Super High Quality Original Factory Tool Made in Germany!
Clickhere to see a detailed Application ChartMeasure filter diameter canister diameter or Check yourmanuals for details and size needed.

Factory Tool 3417 29.50

Tappet Depressor Set 81.50

VW546 Tappet Depressor Tappet Depressor used for preloading cam followers. For Bucket Tappets on VW Golf, Jetta, Caddy, Scirocco, Passat up to 1982 Also Audi 80 , 100

Plus 2078A Tappet Depressor needed for preloading cam followers while exchanging valve adjusting shims. Applicable: Late model VW Audi 4 and 5 cylinder gas engines. More Detail: Some German Tool books have the following info on this tool... For all 4 cylinder engines with bucket tappets 1983 and Newer and all 5 and 6 Cylinder with bucket tappets Golf, Jetta, Scirocco, Passat, Audi 80, Audi 80 Coupe, Audi 80 Quatro, Audi 100, 200, LT28 50D.

Cam Bar and Pin for 2 Valve 139.50

Camshaft TimingTool Set (2)
TOOL REF 3243
Cam/Bar Holder 2 valves per cylinder/
Used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during belt change head assembly work.
Applicable Audi 90 A6 A4  94 97 AFC Engine

TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF
BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6

Please note: 3243 for 2 valves per cylinder. 

Cam Bar and Pin for 2 Valve 139.50

SpecialOpen Socket 22mm 25.00

On Sale *
22mm Special TubeSocket
1.) Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench)
2.) R&R of Oxygen Sensor.
Also for R&R of some Mercedes Diesel injectors ( OM604, 605 & 606).
Details: For removing and installing front strut unit on VW Golf up to 1988, Jetta up to 87, Scirocco, Audi 80 and Golf 3 from 1993 newer, Passat from 88 and newer, Audi 100, 200 Coupe and Quatro.
This tool is often used in conjunction with a 7mm hex wrench.
Clickhere for a picture of the tools in action:

Headbolt & Drain Plug Socket Set 28.00

TWO TOOLS!!!
Audi Headbolt Tool (LEFT)Number T10070 Headbolt Tool 1/2 Drive Used to remove and install cylinder headbolts. Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2 inch. Many Audi Headbolts have switched to the new pattern. This will fit into the new special screw profile. Plus Drain Plug Socket (right)Special Tamperproof Transmission Drain Plug Socket.Triple Square (12 Point XZN)Same as Volkswagen Tool 3357.For Porsche Boxster and Audi A4, A6 and Passat. Dont hesitate...these are BOTH the CORRECT tools for the job!

M44 Oil Service Wrench 29.50

Oil service Wrench 74mm with 14 Points (inside flats flutes).
Some applications include: Mercedes, Audi, VW Golf,
and new body Jetta, TDI (Diesel) and the following gas vehicles;
Passat, Golf and Jetta with 1.8 turbo and 2.0 litre, Rabbit, Dasher, Scirocco,and New Beetle.
Mercedes M104, M110, M111, M119, M120 C, E
Porsche 944 and 924. 
Some Toyota (Filter 08922 0211 etc...)
Can also be used on BMW Top of housing 1.9L M44
Super High Quality Original Factory Tool Made in Germany!
Clickhere to see a detailed Application ChartMeasure filter diameter canister diameter or Check yourmanuals for details and size needed.

Headbolt & Drain Plug Socket Set 2 28.00

Drain Plug Socket
Plus Heabolt Tool
Details: Tamperproof Transmission Drain Plug Socket.
Triple Square (12 Point XZN)
Same as Volkswagen Tool 3357.
For Porsche Boxster and Audi A4, A6 and Passat.

Plus Audi Headbolt Tool
Number T10070 Headbolt Tool 1/2 Drive Used to remove and install cylinder headbolts. Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2 inch. Many Audi Headbolts have switched to the new pattern. This will fit into the new special screw profile. Set of 2 Audi Tools from ZDMAK

Dont hesitate...these are BOTH the CORRECT tools for the job!

Oil Seal Tool 42.50
Porsche Volkswagen Tool like 204BUsed for proper installationof oil seal on flywheel side of crank shaft. All VW Boxer 4.
read more:

Hazet Oil Service Tool 29.50

Oil Filter Wrench M44 16.99

Oil service Wrench 74mm with 14 Points (inside flats flutes).
(Check your manuals for details and size needed. Measure filter diameter or canister diameter).
This is an excellent deal. This Socket has (2) bonus screws for more strength if needed. 
The srews are kept in the holes at the top when not in use and can be used inserted into the side holes making the tool more effective. Other applications include: Mercedes, Audi, VW Golf, and new body Jetta, TDI (Diesel) and the following gas vehicles; Passat, Golf and Jetta with 1.8 turbo and 2.0 litre, Rabbit, Dasher, Scirocco, and New Beetle. Mercedes M104, M110, M111, M119, M120 C, E Porsche 944 and 924. (will not work on 911) Some Toyota (Filter 08922 0211 etc...) Can also be used on BMW Top of housing 1.9L M44ClickHere for More Applications

Bar and Pin for 5 Valve 139.50

Camshaft Timing Tool Set (2)
TOOL REF 3391
Cam/Bar Holder
V6 / 5 valves per cylinder/
used for the crucial task of securing both engine banks/
camshafts at T.D.C when replacing the timing belt/
to properly align camshaft during timing belt change /head assembly work.
Applicable VW Audi V6 5 Valve 1998 2003
Cam/Bar Holder Not Applicable 3.0 2002 4 cam.

TOOL REF 3242
Crankshaft T.D.C. Lock Pin
Holds crankshaft at top dead center
For installing or removing toothed belt /flywheel drive plate.
T.D.C. Pin Applicable: A4 A6 Volkswagen Passat
Engine Applicable: Volkswagen AHA BDP ATQ BCY
Audi AAH AFC ATQ AHA AKB ART AUX BFM BHF BNK BSB AVK AWN AYS BBD BCY & BEL
T.D.C. Pin Not Applicable 3.0 V6Please note: 3391 for 5 valves per cylinder.

22mm Strut O/2 Sensor Socket 18.99

On Sale 22mm Special Tube Socket 1.) Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench) 2.) R&R of Oxygen Sensor.
Also for R&R of some Mercedes Diesel injectors ( OM604, 605 & 606). Details: For removing and installing front strut unit on VW Golf up to 1988, Jetta up to 87, Scirocco, Audi 80 and Golf 3 from 1993 newer, Passat from 88 and newer, Audi 100, 200 Coupe and Quatro. This tool is often used in conjunction with a 7mm hex wrench.Clickhere for a picture of the tools in action:

Special Open Socket 22mm 25.00

Oil Filter Wrench 74mm 16.99

Heavy Duty Bench Clamp 187.50
313 Volkswagen Porsche Tool Designed for to securely carry the full weightof an air cooled twin turbo Boxer 6Tool Number VW 313Properly suited for a work bench.
read more:

Valve Adjustment * Deep Offset Wrench 5.99
German MadeDeep Offset 12 Point Spanner.This Exact item is no longer available from Germany.PORSCHE VW VALVE ADJUSTMENTTYPE 1, 2, 3 and 4 VOLKSWAGEN
read more:

Power Steering Waterpump Pulley Tool 24.00

VA6024Power Steering and Waterpump Pulley Removal & Replacement Tool Volkswagen AudiUsed to hold the power steering or water pump pulley stationarywhile removing or replacing the three socket headbolts that attach pulley to the shaft.Tool is designed to be used on pulleys that utilize these socket head bolts.Applications:VW Audi 4 cylinder water cooled gas or diesel engines from 1975 to current.Volkswagen V6 1992 and newer.Audi power steering pump pulley V8 1990 and newer.Audi V6 1992 to current.Also VW 1983 to 1988 and Audi 1981 to 1995 with socket head boltsholding the pulley to power steering pump.

Press tool 401 0.00
High Quality German Made
Volkswagen Press Tool for assembly work.
Original Factory Tool.
read more:

Puller Only 84.00
Puller Same as Volkswagen Tool 3032
Injection Pump ToolUsed for the proper extraction of injection pump drive gear.Applicable:VW Audi diesels *Excluding TDI
read more:

You Searched for

volkswagen golf tdi

Trade Links With ZDMAK