toyota special tools SARASOTA toyota special tools special tools vw -- mmk4mkt

Toyota Harmonic Damper 69.50

Toyota Lexus Harmonic Damper Holding Tool Used to Remove and Install the crank bolt on Lexus/Toyota with ease. This holding tool works with the following: Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.Toyota 1992 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8.

Toyota / Asian Oil Seal Bonus Kit 159.50

Universal Asian Oil Seal Installation Bonus Kit
This special kit was designed for the proper installation of crank shaft oil seals, situated within confined areas on most 4, 6 and 8 cyl Toyota, Lexus, Nissan, Mitsubishi, Mazda and Infiniti.Application includes camshaft oil seal installation of Toyota Lexus 2.5L, 2.8L, 3.0L, 3.4L, 4.0L & 4.3L The stepbolts screw into the cam or crankshaft end. The press nut and washer allows for an even pressing force, seating the oil seal into the engine case with ease.

See tool TOY100 for 4 cylinder Asian camshaft oil seal installation. Honda Acura, see tool HO100, HO105, HO115, and HO115 WB.

Set of Two Terminal Tools 29.50

Special Electrical Tools Terminal Tools Set of 2
Special Electrical Tool Terminal Tool Eliminate Damaged wires and Terminals. Wire Terminal tools are designed to remove wires from terminals without damage to either. The prongs depress the "barbs" on conventional terminals.

Push Pin Pliers Set of 2 39.50

PUSH PIN REMOVAL PLIERS SETPush pin pliers are designed to remove plastic push pins onHonda, Toyota, GM, Saturn and many other vehicles.Special ground tips remove the pins without damage.Pliers can also be used to remove U Joint circle clips.One tool with a 75 degree offset head to allow push pin removal in tightareas. These tools will save you time and headaches.

Oil Seal Installation Bonus Kit 159.50

Toyota Crank Seal Installer 41.50

For the proper and easy installation of oil sealon pulley side of the crankshaft.Applicable: Most 4 & 6 cylinder Toyota engines

Toyota Transmission Tool 19.50

Puller used for the proper extraction of front counter shaft bearing.Applicable: Toyota transmission L52 81 83 5speed /4WD

Toyota Transmission Tool 28.00

Puller used for the proper extraction of rear counter shaft bearing and 5th gear. Applicable: Toyota transmission L52 81 83 5speed 4WD.

Stahlwille Quality Tools 00
Special Reversible 1/4 inch bit holding Ratchet.
Overall Length is 110mm.
read more:

Terminal Tool Wire Remover 13.99
Special Electrical Tools Terminal Tool Eliminate Damaged wires and Terminals.
Wire Terminal tools are designed to remove wires from terminals without damage to either. The prongs depress the "barbs" on conventional terminals. See set of 2 below.
read more:

Toyota Valve Adjustment Tool 19.99

This tool has been designed to allow for easy valve adjustment on most Toyota overhead cam engines using spacer shims for valve adjustment. In operation, the tip of the pliers pushes between the spacer shim and the camshaft as the pliers are squeezed close. This action moves the shim and its valve lifter down from the camshaft lobe.In the down position the separate wedge tool is placed between the valve lifter ledge and the camshaft. This wedge tool then maintains a gap between the shim and the camshaft as the pliers are removed. The spacer shim can then be removed through this gap and replaced with one of the correct thickness.
Works especially well with3S FE and 3S GELC Toyota DOHC.
Toyota number 09248 55040
For Camry, Sienna, Avalon, Solara, Supra, 4Runner, MR2, Previa, Paseo, Tacoma, Tercel, T100, Celica.
Packaged as shown with pliers and spacer wedge.Does not work with Land Cruiser 1993 1997 and Lexus LX400 1994 1997

M8, M10 and M12 Triple Square Set 3 39.99

Super Set!
Three Headbolt Tools Triple Square 12 Point (XZN) Sockets M8, M10 and M12
Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.
Excellent for working on German vehicles.
Each tool is 5 1/2 inches overall and the shaft is 4 inches long!
Zdmak Special Set of 3 big 1/2 drive Tools!

Toyota Master Set 99.99

ZDMAK THREE ITEM MASTER KIT FOR TOYOTA
Cam Tool Plus Headbolt tool Plus Valve Tool
You can read about all three of these items on this page (above). This set includes item numbers TOY4VT, plus TOYHB and 2705.

Toyota Cam Installer Set 49.50

Installer Kit used for proper installation of cam shaft seal on transverse mounted Japanese engines,placing cam shaft within close proximity to shock tower.Due to this confined space, it is difficult to replace cam seal using conventional methods.Applicable: Toyota Engine 3AC, 3EE, 3S FE, 3S GE, 4AC, 4A GE, 5S FE, 7M GE, 7M GTE.Mazda B6, BP. Nissan engine VG30.

Best Quality Thin Wrench Set 68.50

Set of 2 Long Pattern Thin Wrenches
German Car Special *
One of each size: 36mm and 32mm
Overall length of 20 inches.
Thickness of each wrench is 8mm.Tools will come with a handle grip on each.
Many applications for these two tools.

Headbolt & Drain Plug Socket Set 28.00

TWO TOOLS!!!
Audi Headbolt Tool (LEFT)Number T10070 Headbolt Tool 1/2 Drive Used to remove and install cylinder headbolts. Volkswagen Audi V6 and 4 Cylinder 5 valve engines. Long pattern for deep located screws. Drive size is 1/2 inch. Many Audi Headbolts have switched to the new pattern. This will fit into the new special screw profile. Plus Drain Plug Socket (right)Special Tamperproof Transmission Drain Plug Socket.Triple Square (12 Point XZN)Same as Volkswagen Tool 3357.For Porsche Boxster and Audi A4, A6 and Passat. Dont hesitate...these are BOTH the CORRECT tools for the job!

Best Quality! Thin Wrench Set 68.50

Best Quality * Set of 2 Long Pattern Thin Wrenches
German Car Special *
One of each size: 36mm and 32mm
Overall length of 20 inches.
Thickness of each wrench is 8mm.Tools will come with a handle grip on each.
Many applications for these two tools.

Toyota Locknut Tool 19.99

Toyota front wheel bearing design change requires a new procedure to remove the locknut: The free wheel hub assembly locknut is on the inside, so the hub must be removed to gain access. This wrench has a four pin design accommodates the four holes in each locknut, which prevents slippage under high torquing requirements. Works on 1995 and newer Tacoma, and 1996 and newer T100 and 4Runner.

Set 2 Power Lifter Pickup Tools 38.00
Set of 2 * Pick up Tools
One 19 inch long with lift cap 1.5lbs.
One 2 feet long with 3 lbs. capacity.

Please note: picture is for reference only.

Tools are also sold separately below.

read more:

Headbolt Tool Set 2 29.50

These are the tools you are looking for!
Plus they are on sale!
Headbolt Tools 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi
Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tools. Please read: The T10070 is the correct current VW Audi number for this new style tool.The old tool number was 3452 and is now discontinued.Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this new style a Polydrive.

Plus you get Headbolt Tool Triple Square 12 Point (XZN) Socket M10Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.Excellent for working on German vehicles.
This XZN tool is 5 1/2 inches long and the shaft is 4 inches.
Super set for removing & installing cylinder headbolts on both early and late model 1.8T and 2.0L gas engines. You will get both tools with this purchase.

Best Seller ! Radio Tools Set 24.99

This is one of the best sets on the market. This is a Master Set for BMW Mercedes Porsche VW Audi and DIN. Included is a total of 3 different sets Volkswagen Audi, two different tools for BMWand a set for Mercedes Porsche and a DIN Ford set. The VW Tools (4) Number T10057Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box. If you have 4 slots VW AUDI this is the 4 keys you need) Plus you get Number VW 3316 (2) Radio Removal Tools New Body Style Passat Jetta Golf . You will get virtually full coverage forVolkswagen Audi when you buy this master set. The BMW Radio Removal Tools areone Pentagon shaped tool with a 3 5/8 inches overall length. Applicable: Most BMWs. This Five sided driver is used to release anti theft radio mounts.You will also get the special rare small allen tool for BMW (upper left) Fornewer BMW E38 & E39 7 SERIES Plus Mercedes most coverage for newer and oldervehicles, especially 1992 and newer 129, 140, 163, 202 & 210 PLUS Range Rover with Becker Nav System.The MB Tools also work on Porsche. Appl: Turbo GT, GT2, GT3, Boxster, Cayenne 911, 996 , 987, Carrera etc. Same as Porsche ref: 000 721 957 01

Audi VW Headbolt Tool Set 2 29.50

These are the tools you are looking for!VW AUDI Headbolt Tools 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi
Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tools. Please read: The T10070 is the correct current VW Audi number for this new style tool.The old tool number was 3452 and is now discontinued.Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this new style a Polydrive.

Plus you get Headbolt Tool Triple Square 12 Point (XZN) Socket M10Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.Excellent for working on German vehicles.
This XZN tool is 5 1/2 inches long and the shaft is 4 inches.
Super set for removing & installing cylinder headbolts on both early and late model 1.8T and 2.0L gas engines. You will get both tools with this purchase.

24mm Socket 3/4 Drive 16.50

Big 3/4 inch Drive 24mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

24mm Socket 1/2 Drive 12.52

1/2 inch Drive 24mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!
Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads. If you have never used German sockets on German fasteners, you will definitely notice a difference. No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

22mm Socket 3/4 Drive 15.50

Big 3/4 inch Drive 22mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

21mm Socket 3/4 Drive 16.50

Big 3/4 inch Drive 21mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads. If you have never used German sockets on German fasteners, you will definitely notice a difference. No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

19mm Socket 3/4 Drive 15.50

Big 3/4 inch Drive 19mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads. If you have never used German sockets on German fasteners, you will definitely notice a difference. No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

36mm Socket 3/4 Drive 26.60

Big 3/4 inch Drive 36mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

30mm Socket 1/2 Drive 15.30

1/2 inch Drive 30mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads. If you have never used German sockets on German fasteners, you will definitely notice a difference. No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

41mm Socket 3/4 Drive 40.00

Big 3/4 inch Drive 41mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

27mm Socket 3/4 Drive 19.99

Big 3/4 inch Drive 27mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

23mm Socket 3/4 Drive 17.50

Big 3/4 inch Drive 23mm Socket 6 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

Holding Tool and Wrench Set 49.99

Set of 3 Includes:
Double Waterpump Tool*
This special tool covers most popular applications
Used for securing Water Pump Hub from rotating during R & R of Fan Clutch Nut
Applicable:M10, M20, M30, M40, M41, M42, M50, M60, M62

Plus
2 Long Pattern Thin Wrenches
German Car Special Tools
One of each size: 36mm and 32mm
Overall length of 15 inches.
Thickness of each wrench is 8mm.

27mm Extra Deep Socket 34.50

1/2 inch Drive 27mm Deep Socket 12 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

24mm Extra Deep Socket 31.50

1/2 inch Drive 24mm Deep Socket 12 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

28mm Extra Deep Socket 34.50

1/2 inch Drive 28mm Deep Socket 12 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

26mm Extra Deep Socket 34.50

1/2 inch Drive 26mm Deep Socket 12 Point.
High Quality Tools
Made in Germany by Stahlwille!

Please note: some of the items in the Stahlwille section of this website are (non stock) special order. If you need to know immediate status on an item (or if you are unable to wait for a bckorder) please call or email before purchasing. If you do not see the size socket you are looking for contact Zdmak

Stahlwille sockets are made to exceed the standards of DIN 3124; they fit as tight as a glove and can withstand extreme torque loads.If you have never used German sockets on German fasteners, you will definitely notice a difference.No more sloshing around and rounding off heads of bolts. Stahlwille makes a wide variety of special tools that are ideal for working on German and other European automobiles, but they are equally useful for working on American and Japanese cars.

BMW 3037 Pack 91.00

SET OF 3 Includes:
Holding Tool for securing water pump hubfrom rotating during R&R of fan clutch nut.Applicable: Engine M40, M41, M42, M60, M62
Plus *
2 Long Pattern Thin Wrenches
German Car Special Tools *
One of each size: 36mm and 32mm
Overall length of 20 inches.
Thickness of each wrench is 8mm.Tools will come with a handle grip on each.
Many applications for the two thin wrenches

BMW 3008 Pack 89.50

SET OF 3 Includes:
Holding Tool for securing water pump hubfrom rotating during R&R of fan clutch nut.APPLICABLE M10, M20, M30, M50, WITH 32MM CLUTCH NUT.
Plus *
2 Long Pattern Thin Wrenches
German Car Special Tools *
One of each size: 36mm and 32mm
Overall length of 20 inches.
Thickness of each wrench is 8mm.Tools will come with a handle grip on each.
Many applications for the two thin wrenches

Toyota Lexus Cam Tool Kit 58.00

Cam Seal Installer w/ 10 & 12mm X 12.5 Threaded Cam Bolts Features and Benefits: This tool is designed to easily install the cam seals in 4 & 6 cylinder engines for Mazda, Nissan & Toyota/ Lexus engines that have 10 & 12mm x 1.25 cam bolts. These engines are mounted transversely which puts the camshaft end in very close proximity to the shock tower making replacement of the cam seal extremely difficult using conventional methods. Simply screw the threaded rod into the cam end, slide the body over the rod against the seal and press in the seal using the nut provided. This tool comes in black finish.

Hazet Quality Tools 59.50
Bmw Headbolt Tool.
MADE IN GERMANY by Hazet!
E12 Female Special Lock Ball Torx Socket for cylinder head screws M42 4 cylinder/4 valve and M50 6 cylinder/4 valve. Drive size is 1/2 inch.
read more:

Insulated Driver Set Made in Germany 48.50
Professional Quality Insulated Tool Set.Individually Tested Tools Certified To 1000 Volts.Tools Meet The Following Safety Specifications:ASTM F 1505 01 IEC 900 VDE 0682/Part 201 ISO 9001Certified Tools Meet OSHA Definition For Insulated Tool Requirements.Quality Tools Made In GermanyCVM Tool Steel Hardened To Average 58/60RC. 10 Piece Insulated Screwdrivers
Set Includes:Slotted: 2.0, 2.5, 3.0, 3.5, 4.5, 6.5 Phillips: 0, 1, 2, 3
read more:

Two Pickup Tools 9.99
RETRIEVER SET
Two tools for Picking up bolts, screws, washers, etc. from confined areas
Indispensible for home & workshop. Set includes:
RETRIEVER CLAW
Flexible shaft reaches confined areas, with durable holding claw
MAGNETIC RETRIEVER
With Flexible shaft also for reaching into tight spots, plus strong, durable magnet.
Both tools are 24 inches in length overall.
Picture shows both tools plus an exploded view of the claw end.
read more:

Radio Removal Set 24.99

Set of Volkswagen Audi Radio Removal Tools Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box.
PLUS * Set Number vw 3316 Radio Removal Tools New Body Style Passat Jetta Golf Please check your manuals for details.
You will get virtually full VOLKSWAGEN coverage with this set
Plus BMW Radio Removal Tool.Pentagon shaped tool with 3 5/8 inches overall length.Applicable: Most BMWs.This Five sided driver is used to release anti theft radio mounts.YOU ALSO GET THE SPECIAL SMALL ALLEN (Right) side of picture FOR NEWER E38 & E39 7 SERIES
Plus * MERCEDES RADIO REMOVAL KEYS FOR NEWER AND OLDER VEHICLES

ZDMAK SPECIAL 2 Brake Tools 49.95

This sale is for two brake tools.
First tool on the UPPER LEFT is Drift Pin 4mm
Tool used for removing disc brake pads.
This Drift pin is designed to press the brake pad retaining pins back w/o damage to pin or caliper.
For a variety of brake applications. (overall length is 7 inches.)

Second tool LOWER RIGHT is the Spreader/Disc Brake Piston Reset Tool
This is a very useful tool for safe resetting of disc brake pistons on vehicles with fixed caliper disc brakes.

Complete VW Audi Radio Keys 24.99

4 Tools for BMW 34.99

Lot of 4 Tools for BMW Repair You get all four tools pictured with thispurchase. The First item (clockwise top left to right) 
A. "Double Waterpump Tool" This special tool covers most popularapplications Used for securing Water Pump Hub from rotating during R & R ofFan Clutch Nut BMW engines:M10, S14, M20, M21, M30, S38, M40, M41, M42, M43,M44, M50, M52, M60, M62, S50
B. "Radio Removal Tool" Pentagon shaped tool with 5 Sides. Theoverall length of this tool is 3 5/8 inches. Appl: Most BMWs. Including E38 E397 Series etc This tool is used to release anti theft radio mounts.
C. "Flexible Shaft" Hex Nut Driver Size on this Nut Driver is 6mm Rubber coated flexible shaft Nut Drivers work well on hose clamps, hex headedscrews and nut screws.
D. "Extra Long 5/8 Spark Plug Socket" (16mm) Overall Length is 4 1/2 inches. 3/8 Drive . Knurled drive end plus rubber insert for better grip.

BMW Self-Parking Car System Video
So what's the difference between this auto parking system and various others that have been previewed the past few years like the Toyota Prius one? Well, BMW's doesn't kneed the driver to be in the car.
read more:

Hazet Piston Ring Pliers 59.95

Piston Ring Pliers Made in Germany by Hazet! Tool used for 50 100 mm piston rings. The company HAZET was established in 1868 by Hermann Zerver. Today, the Plant 1 at Remscheid is one of the most advanced in Europe. HAZET WERK, the German tool manufacturer from Remscheid demands high standards offering a large range of hand tools and of special tools of highest quality which are especially suitable for the automotive engineering. What matters is the tool quality HAZET Quality is a guarantee for good work results.

Hexagon Offset Wrenches 00
Double ended hexagon bi hex offset socket wrenches, bright chrome plated.
Special heat treatment to increase superficial hardness.Compared to item 937, these tools stand out for their bright finishing resulting from both mechanic and manual processes.To be used with tommy bars in the drive holes.The hole on the short end allows access to nuts fitted onto protruding threads.
read more:

You Searched for

toyota special tools

Trade Links With ZDMAK