VOLVO TOOLS SARASOTA VOLVO TOOLS BMW SERVICE RESET TOOL -- mmk4mkt

Oil Filter Wrench 14.95

For removing the plastic housing on cartridge type oil filters
found on late model Volvos
Same as Volvo ref. number 999 5679.
Volvo V40, S40, S70, S80, V70, XC70, XC90, S60, 300, 400, C70 Conv
C70 Coupe etc..
Majority of newer Volvo Applications
86mm 16 Flute 3/8 Drive size.

Volvo Clutch Tool 6.99

Volvo Clutch Alignment Tool (Diesel D24)Clutch tool is extremely durable long lasting and inexpensive. These tools can be used over and over again.A must for clutch repair shop, clutch specialist, transmission repair shops, automotive stores, school shop classes, clutch resellers, foreign and domestic repair shops.

2 Pins and 2 Plates 103.00

2 Pins and 2 Plates Set of four tools.VW Audi T.D.I. and New Beetle Cam Kit Reference numbers for the two tools on the left are: 3418 and 3359. Tool Set for factory correct and trouble free installations. This is a popular set for Diesel timing of Bosch injection pumps. This set has been developed for aligning the cam shaft with the Diesel pump on 1998 and newer VW models equipped with a T.D.I. engine. This two piece lock plate and alignment pin allows the technician for factory correct and trouble free installations.

Tools on the right side of image are Diesel Lock Plate / Cam Setting Bar Same as Volkswagen ref 2065a Tool used for securing the cam shaft from rotating and maintaining correct timing position engine AAZ during R&R of cam shaft drive belt. Applicable: VW/Audi diesel and Volvo 6 cylinder 2.4L diesel 1981 86 Lock Pin for Diesel (Same as VW tool 2064). Tool used for securing Bosch diesel injection pump sprocket from rotating during R&R of cam shaft drive belt. This Locking Pin also assists in locating the general timing position of pump. Volkswagen Audi diesel and Volvo 6 cylinder 2.4L diesel 1981 86 All 4 tools are High Quality Made in Europe!

Extractor Tool Kabelex 00

Ejection extractor tools for contacts MAN/Volvo, DaimlerChrysler, BMW, Porsche, Volkswagen, Audi: tools for flat plug in sockets with asymmetrically positioned latches in terminals with single release, with two release channels,etc..
ClickHere for More Kabelex information. Extractor tools for soldered contacts, for Micro Timer I, cable extractor tools for Micro Timer II, III, Pit Pod contacts, Maxi Power Timer , SLK contactsetc...

Service Off Volvo 79.00

Turn off service and inspection indicator light.

Set of 5 with Indicator 123.99
"Grand Master"
Set of 5 Tools
Including Dial Indicator
Plus 3032 Injection Pump Tool
Puller used for the proper extraction of injection pump drive gear.
Applicable: Volvo and VW / Audi diesels Excluding TDI *
PLUS: VA6015 Used for accurate adjustment of Bosch diesel injection pump.
PLUS: 2065A Diesel Camshaft Locking Plate
PLUS: 2064 Pin.
read more:

Volvo Oil Seal Arbor 113.50

Arbor above used for the proper installation of oil sealon the flywheel side of the crankshaft.Applicable: Volvo engine B21, B23, B230.

Set of 4 with Indicator 63.50
"Baby Grand"
Set of 4 Tools
Including Dial Indicator
Plus VA6015 Diesel ToolUsed for accurate adjustment of Bosch diesel injection pump.This Dial Gauge Holder screws into the back of theinjection pump and comes equipped with a 10cm dial indicator extension pin. This tool is to be used in conjunction with a dial indicator.(not included).Applicable:All VW/Audi Diesel and Volvo 6 cylinder 2.4L diesel '81 '86 engines.
PLUS 2065A Diesel Cam Shaft Locking Plate
PLUS 2064 Pin.
read more:

Belt Tensioner Release Kit 29.99

V420 Belt Tensioner Release Tool Kit for Volvo
Includes locking pin to ease belt removal and installation.Appl.: Volvo 850 with female square drive in tensioner

Pin , Plate and Holder 51.99
Set of three tools including:VA6015 Diesel ToolUsed for accurate adjustment of Bosch diesel injection pump.This Dial Gauge Holder screws into the back of theinjection pump and comes equipped with a 10cm dial indicator extension pin. This tool is to be used in conjunction with a dial indicator.(not included).Applicable:All VW/Audi Diesel and Volvo 6 cylinder 2.4L diesel '81 '86 engines. PLUS 2065A Diesel Cam Shaft Locking Plate 2065aPLUS 2064 Locking Pin
read more:

Trailing Arm Bushing Tool Set 154.00

For efficient R&R of rear trailing arm bushings.Applicable: All Volvo 200 series.Please read: Also included in the price of this kit is the componentpictured (upper left) Item number V5079These two tools are sold together here as a set. This is a very good deal

Dial Indicator and Holder 98.50

Bosch Diesel Injection Pump
Timing Indicator Tools.
With High Quality Dial Indicator Made in Germany!
You will not find this price anywhere except Zdmak!
Tools are used for the accurate setting of
the Bosch diesel fuel injection pump timing.
The Holder screws into the back of the injection pump,
giving a dial indicator reading necessary for setting
the correct pump timing.
This set comes complete with the correct tools for the job!
Contents: Metric Dial Indicator Made in Germany,
plus holder plus the 10cm dial indicator extension pin,
making the timing easy to set,
as the timing has a range from 0.83mm to 1.15mm.
For use on VW and Audi diesels.
Also works with 1981 1986 Volvo 6 cyl 2.4L diesels,
1989 1994 Dodge 6 cyl 5.9L diesels.

FYI FOR PEOPLE WHO DECIDE "NOT" TO USE THIS SET
Here is some helpful info...Universal conversion factor for milimeters into decimal inches is .03937
EXAMPLE: 13mm X .03937= .5118"

Set 2 Power Lifter Pickup Tools 38.00
Set of 2 * Pick up Tools
One 19 inch long with lift cap 1.5lbs.
One 2 feet long with 3 lbs. capacity.

Please note: picture is for reference only.

Tools are also sold separately below.

read more:

Volvo Cam & Crankshaft Tool Kit 515.00

This set is designed to properly Secure and Align
the cam and crankshaftduring R and R of cylinder head assemblies
on (5) and (6) cyl engines.
Set is also for the proper installationof camshaft cover
to the engine head and useful when replacing camshaft seal.
Volvo Reference numbers: 9995454, 9995453,9995451,9995452.
Call me and I will fax you the details.
Applications include 700, 800, 850, 900, 960, C70 Coupe and Conv,
S40, S60, S70, S80, S90, V70 2000, V70XC, XC70, V90, XC90.

Insulated Driver Set Made in Germany 48.50
Professional Quality Insulated Tool Set.Individually Tested Tools Certified To 1000 Volts.Tools Meet The Following Safety Specifications:ASTM F 1505 01 IEC 900 VDE 0682/Part 201 ISO 9001Certified Tools Meet OSHA Definition For Insulated Tool Requirements.Quality Tools Made In GermanyCVM Tool Steel Hardened To Average 58/60RC. 10 Piece Insulated Screwdrivers
Set Includes:Slotted: 2.0, 2.5, 3.0, 3.5, 4.5, 6.5 Phillips: 0, 1, 2, 3
read more:

Pump Tool plus Pin , Plate and Holder 127.99

Set of 4 tools including:3032 Injection Pump ToolPuller used for the proper extraction of injection pump drive gear.Applicable: Volvo and VW / Audi diesels Excluding TDI * PLUS: VA6015 Used for accurate adjustment of Bosch diesel injection pump.PLUS: 2065A Diesel Camshaft Locking Plate Tool PLUS: 2064 Lock Pin for Diesel

Locking Pin and Plate 26.00
Set of two tools including:2065A Diesel Cam Shaft Locking PlateThis locking Plate (above) is the same as vw tool 2065a Used for securing the cam shaft from rotatingand maintaining correct timing position during R&R of cam shaft drive belt.Applicable:All VW/Audi Diesel and Volvo 6 cylinder 2.4L diesel '81 '86 engines. PLUS:2064 Lock Pin for Diesel This Locking Pin is used forsecuring Bosch diesel injection pump sprocket from rotatingduring R&R of cam shaft drive belt.This Pin also assists in locating the general timing position of pump.Applicable: All VW/Audi diesel engines.
read more:

Timing Belt Tensioner 44.95

Volvo Timing Belt Tensioner Tool with 6mm Hex Adjuster.On the 1998 and later Volvo engines the timing belt tensioner is located down near the bottom of the engine in a hard to reach area. This uniquely designed tool reaches down and rotates the 6mm hex adjuster on the timing belt tensioner so that one technician can easily set the correct tension preload and tighten the lockdown bolt. This unique tool works on all engines 98 and later with the 6mm allen adjuster and includes: 4 Cylinder, 1.9L, 5 Cylinder, 2.3L, 2.4L, 2.5L, 6 Cylinder, 2.8L, 2.9L

Two Pickup Tools 9.99
RETRIEVER SET
Two tools for Picking up bolts, screws, washers, etc. from confined areas
Indispensible for home & workshop. Set includes:
RETRIEVER CLAW
Flexible shaft reaches confined areas, with durable holding claw
MAGNETIC RETRIEVER
With Flexible shaft also for reaching into tight spots, plus strong, durable magnet.
Both tools are 24 inches in length overall.
Picture shows both tools plus an exploded view of the claw end.
read more:

Pin , Plate and Holder 64.00

Set of three tools including:VA6015 Diesel ToolUsed for accurate adjustment of Bosch diesel injection pump.This Dial Gauge Holder screws into the back of theinjection pump and comes equipped with a 10cm dial indicator extension pin. This tool is to be used in conjunction with a dial indicator.(not included).Applicable:All VW/Audi Diesel and Volvo 6 cylinder 2.4L diesel '81 '86 engines. PLUS 2065A Diesel Cam Shaft Locking Plate 2065aPLUS 2064 Locking Pin

Klein Tool Pouch 46.95
Klein Tool Pouch
Leather, 8 Pockets, Thong, Snap, Tunnel Loop
Leather construction. Provides space for an large number of tools. Riveted to assure long life.
Klein Tools product line includes virtually every major type of hand tool used in construction, electronics, mining, and general industry in addition to the electrical and telecommunications fields.Klein Tools also supplies a line of occupational protective equipment. Klein remains dedicated to supplying only the finest quality products.Made for professional users, Klein tools are available through stocking distributors worldwide.
read more:

Big Mak 126.00
Master Kit
Set of 6 Tools
Including Dial Indicator

Set Includes:
3032 Injection Pump Tool Puller used for the proper extraction of injection pump drive gear. Applicable: Volvo and VW / Audi diesels Excluding TDI
PLUS: VA6015 Holder used for accurate adjustment of Bosch diesel injection pump.
Plus: 2065A Diesel Camshaft Locking Plate Tool
PLUS: 2064 Lock Pin for Diesel.
Plus the Pin Wrench (made in Germany) for easy adjustment of Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes. This wrench with its protruding pins, grabs the center of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment. Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80.
Plus Dial Indicator
read more:

Set 4 Measuring Tools 00
Item1685/C7DescriptionAssortment of 7 measuring and marking tools, in wooden case
read more:

Set of Two Terminal Tools 29.50

Special Electrical Tools Terminal Tools Set of 2
Special Electrical Tool Terminal Tool Eliminate Damaged wires and Terminals. Wire Terminal tools are designed to remove wires from terminals without damage to either. The prongs depress the "barbs" on conventional terminals.

Locking Pin and Plate 26.50

Set of two tools including:2065A Diesel Cam Shaft Locking PlateThis locking Plate (above) is the same as vw tool 2065a Used for securing the cam shaft from rotatingand maintaining correct timing position during R&R of cam shaft drive belt.Applicable:All VW/Audi Diesel and Volvo 6 cylinder 2.4L diesel '81 '86 engines. PLUS:2064 Lock Pin for Diesel This Locking Pin is used forsecuring Bosch diesel injection pump sprocket from rotatingduring R&R of cam shaft drive belt.This Pin also assists in locating the general timing position of pump.Applicable: All VW/Audi diesel engines.

Saab Set 3 Clutch Tools 13.99

Set of 3 Clutch Alignment Tools Covers a wide variety of Saab Applications.
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.

Set 3 Porsche Clutch Tools 13.99

Set of 3
Porsche Clutch Alignment Tools
Covers a BIG variety of Porsche Applications.
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.

Locking Pin Only 9.50
Lock Pin for Diesel 2064 For securing Bosch injection pump sprocket from rotatingduring R&R of cam shaft drive belt. This Pin also assists in locating the general timing position of pump.Applicable: All VW Audi diesel engines. Volvo D24
read more:

Set 3 BMW Clutch Tools 13.99

Set of 3
BMW Clutch Alignment Tools
Covers a BIG variety of BMW Applications.
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.
Readmore about this 3 piece Click Here

Two Pickup Tools 5.50

RETRIEVER SET
Two tools for Picking up bolts, screws, washers, etc. from confined areas
Indispensible for home & workshop. Set includes:
RETRIEVER CLAW
Flexible shaft reaches confined areas, with durable holding claw
MAGNETIC RETRIEVER
With Flexible shaft also for reaching into tight spots, plus strong, durable magnet.
Both tools are 24 inches in length overall.
Picture shows both tools plus an exploded view of the claw end.

More Tools 0.00

Be sure to look in the VOLKSWAGEN section for more tools. Plus you will find some sweet deals in the ZDMAK SPECIALS section, and in the TODAYS SPECIALS section. If you need something quickly please email or call. Expedited or Air shipments should be called in as early in the day as possible. I will do all I can to get you the tools you need or help you with your tool search.

Bonus Torx Set 26.00

Torx Bonus Set Including Screwdriver Set 7 Pc. Sizes included: T8, T10, T15, T20, T25, T27 & T30.
Torx (6 Point) heads used for a wide variety of applications and a wide variety of vehicles. Please note: The screwdrivers are not tamperproof they are standard torx. The folding unit and ratchet at the bottom of the picture are both tamperproof. The Fold up tool has Tamperproof Torx tips. Each torx blade has a hole in the tip = Tamperproof) The sizes are: T9, T10, T15, T20, T25, T27, T30, T40 Some applications include: The T25 for use on E34 E32 E36 E39 E38 (tilt slide sunroof). The T30 is for most BMW with supplemental restraint systems / SRS (BMW REF 002110). The T20 is for some applications on E38 (Diffusion Disc Mount).
Torx Combo Mini Bit and Ratchet SetThe seven bits on the left side of the bit holer are Torx TamperproofPlus this set has 1 and 2 Phillips bits, and a flat head bit.The Tamperproof Torx sizes are: T10, T15, T20, T25, T30, T40for Volkswagen, Audi,Volvo, Mercedes and BMW applications.
You will get all of the tools shown here with this purchase.

Volvo Diagnostic Unit 0.00

PC based program. Runs with Windows 98/ME/2000/NT or XP. Available functions/Fault code read out/Erase fault codes/Real time data/ system information/SRI reset. Service information. Function chains evaluation. Engine management, fuel injection, ignition control. Anti lock break system. Safety restraint system, airbag. Electronic climate control, A/C. Immobilizer, keyless entry, anti theft system. Instrumentation, instrument cluster, combined instrument. Transmission, gearbox, all wheel drive. Free full time technical support. Workshop Community data link connection. Download data direct to on board ECM. (July 2004 availability, estimate) Volvo currently priced at only $3,195.00, include Saab for additional $995. 00, with yearly updates for $595.00.
This system is one of the best values offered to the independent shop owner today.

Set 3 Audi Clutch Tools 13.99

Set of 3
Audi Clutch Alignment Tools
Covers a BIG variety of Audi (and many Volkswagen Applications).
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.
Readmore about this 3 piece Click Here

Set 7 Marking and Measuring Tools 00
Item1685/C7DescriptionAssortment of 7 measuring and marking tools, in wooden case
read more:

Volvo Saab Diagnostic Unit 0.00

Set of 6 Exhaust Tools 00
Item5965VA8DescriptionAssortment of 6 exhaust system tools
read more:

Cam Locking Plate Only 16.99
Cam Shaft Locking Plate 2065AUsed for securing the cam shaft from rotatingand maintaining correct timing position during R&R of cam shaft drive belt.All VW Audi Diesel and Volvo D24 6 Cylinder 2.4L diesel 1981 86 engines.
read more:

Live Data Hand Held Scanner 2995.00

Tired of HIGH prices on Scanners?
Serious Inquiries email sales@zdmak.com or call Toll Free 877 938 6657
This is the X431 "All in One" Hand held Diagnostic Scanner
Designed for the professional workshop.
Vehicle year coverage 1988 to 2003 Japanese, and European Vehicles.
Features: Reading and Clearing Fault Codes, Live Data, Component Activation & Data Graphing
Built in Printer, Software update via PC and Internet. All software on 1 Compact Flash card.
Mercedes, BMW, Vauxhall, VW/Audi, Toyota/Lexus,Nissan, Honda, Mitsubishi, Mazda, Chrysler, Fiat, Kia, Hyundai, Daewoo, Ford, Volvo, Renault, CitroenNew Volvo, Renault, Daewoo, Fiat,Kia and Hyundai software available now.
More info Here

Shortie * Drain Plugs 3/8 Drive Tools 0.00

Serious Stubby Short Pattern 3/8 drive Hex Allen Drain Plug Sockets. Very Hard to find in this short version in a 3/8 drive. These tools will work well in a tight spot.
The larger 1/2 drive tools are too big for some applications.
Sizes available 17mm, 14mm, 13mm, 12mm, 10mm and 8mm.
Sold each or in a set of 6.

M8, M10 and M12 Triple Square Set 3 39.99

Super Set!
Three Headbolt Tools Triple Square 12 Point (XZN) Sockets M8, M10 and M12
Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.
Excellent for working on German vehicles.
Each tool is 5 1/2 inches overall and the shaft is 4 inches long!
Zdmak Special Set of 3 big 1/2 drive Tools!

Oil Light Reset Tool 345.00

OTC Oil Light Reset Tool Kit
. Oil changes are the 1 service your shop will perform each year. Enhance your service with this complete electronic tool and manual kit, No. 3596. . This kit will eliminate the need to take the vehicle to the dealer or use an OEM scan tool to reset oil service lights. . Electronic tool set includes the adapters and interface module required to reset the oil service lights on Volkswagen, Audi, Mercedes Benz, BMW, and Volvo. . Manual includes oil light reset procedures for Domestic and Import vehicles not requiring electronic tools to reset, but have manual reset procedures. . A very complete, value packed kit at an affordable price. . Includes interface module, complete set of vehicle adapters, Domestic and Import manual reset procedure instruction manual, in a foam lined hard case.

Ferrari Tools 00

If you would like a current sales flier on Beta Products and Tools please email with your complete mailing address and literature will be sent to you directly.
email: sales@zdmak.com

MoreBeta Ferrari Tools Here

Roll Up Pouch 6.99
Roll Up Pouch Only
DOES NOT INCLUDE TOOLS
PICTURE IS FOR REFERENCE ONLY
12 pocket pouch holds a variety of tools.
Great for auto and motorcycle use.
Made of heavy duty nylon fabric for long life.
Long web strap with velcro fastener keeps pouch closed tightly when not in use.
read more:

Cats Paw Capped Screwdrivers 43.50
6 Pc. Cats Paw Capped Screwdriver Set
Capped so you can strike with a hammer.
Phillips 1, 2, 3, Slotted 7/32", 1/4", 5/16"Blade extends throughout handle and is fully heat treatedTwo composite handle designed for user comfort and reduced hand fatigueCapped end Handle allows the user to strike the screwdriver without damaging the handleHex bolster for extra turning power.
Mayhew Tools has been manufacturing Punches and Chisels in the Western Massachusetts town of Shelburne Falls since 1856. As the oldest Punch and Chisel manufacturer in the U.S., Mayhew Tools has grown from a small tool house to the leader of the industry. Their product line has also grown to include an assortment of Wrecking and Prying Bars, Masonry Tools, Handguarded Tools, Screwdriver Type Pry Bars, Brass Punches, Pilot Punches, All Steel Wood Chisels, Nail Sets, Carbon Scrapers and Hollow Punches.
read more:

BigMak Timing Kit 196.00

Master Kit
Set of 6 Tools
Including Dial Indicator

Set Includes:
3032 Injection Pump Tool Puller used for the proper extraction of injection pump drive gear. Applicable: Volvo and VW / Audi diesels Excluding TDI
PLUS: VA6015 Holder used for accurate adjustment of Bosch diesel injection pump.
Plus: 2065A Diesel Camshaft Locking Plate Tool
PLUS: 2064 Lock Pin for Diesel.
Plus the Pin Wrench (made in Germany) for easy adjustment of Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes. This wrench with its protruding pins, grabs the center of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment. Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80.
Plus Dial Indicator

Best Seller ! Radio Tools Set 24.99

This is one of the best sets on the market. This is a Master Set for BMW Mercedes Porsche VW Audi and DIN. Included is a total of 3 different sets Volkswagen Audi, two different tools for BMWand a set for Mercedes Porsche and a DIN Ford set. The VW Tools (4) Number T10057Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box. If you have 4 slots VW AUDI this is the 4 keys you need) Plus you get Number VW 3316 (2) Radio Removal Tools New Body Style Passat Jetta Golf . You will get virtually full coverage forVolkswagen Audi when you buy this master set. The BMW Radio Removal Tools areone Pentagon shaped tool with a 3 5/8 inches overall length. Applicable: Most BMWs. This Five sided driver is used to release anti theft radio mounts.You will also get the special rare small allen tool for BMW (upper left) Fornewer BMW E38 & E39 7 SERIES Plus Mercedes most coverage for newer and oldervehicles, especially 1992 and newer 129, 140, 163, 202 & 210 PLUS Range Rover with Becker Nav System.The MB Tools also work on Porsche. Appl: Turbo GT, GT2, GT3, Boxster, Cayenne 911, 996 , 987, Carrera etc. Same as Porsche ref: 000 721 957 01

Dogleg and 8mm Hex Set 29.50

Hex Tools (2) Dogleg Plus Regular 8mm Allen
Set of Two Tools Sturdy 1/2 Drive Dogleg (offset) 8mm Allen SocketApplicable: M116, 117
Overall length of the tool is 4 1/4 inches.
Tool used for R&R of cylinder head bolts.
Similar to Mercedes number 000 589 3407 00.
Plus 8mm (straight) standard Hex 1/2 drive.
Excellent tools for working on Mercedes and other German vehicles.

Junior Tool Bag 27.99
Bucket Boss Brand GateMouth Jr. Tool Bags

Ideal for cordless power tools and accessories

Super wide "gate mouth" design

Size: 13" x 9" x 8"Product Description
From the Manufacturer
Just the right size for power tools. This bag is engineeredto do what the plastic or metal case provided with small power toolscant carry a cordless tool, battery charger, spare battery and a complete setof hand tools and accessories specific to the job. Foam padded sides and bottomprotect walls from dings, floors and counters from scratches. Interior andexterior tool pockets of various sizes will fit most tool combinations. RickDuckwear color scheme. A better way to carry small power tools, it also makes afine general tool bag. 6 exterior, 17 interior pockets. 13 in. L x 9 in. W x 8in. H.
read more:

Puller, Pin , Plate , Holder , Pin Wrench 146.00

Set of five tools: vw 3032, VA6015 PLUS 2065A PLUS 2064 PLUS 12717
Details:
3032 Injection Pump Tool Puller used for the proper extraction of injection pump drive gear. Applicable: Volvo and VW / Audi diesels Excluding TDI * PLUS: VA6015 Used for accurate adjustment of Bosch diesel injection pump. PLUS: 2065A Diesel Camshaft Locking Plate Tool PLUS: 2064 Lock Pin for Diesel. Plus the Pin Wrench (made in Germany) for easy adjustment of Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes. This wrench with its protruding pins, grabs the center of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment. Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80.

You Searched for

VOLVO TOOLS

Trade Links With ZDMAK