PORSCHE CLUB SARASOTA PORSCHE CLUB PORSCHE FORUM -- mmk4mkt

Porsche Hub Wheel Bearing 220.00

B90 Porsche Main Kit Hub/Wheel Bearing R&RDesigned to accurately and efficientlyExtract or Install the Wheel Bearing and Hub of spindle assemblies.Applicable: all 911, 912, 914, 924, 928, 944, 968and Boxster with S.R.W.B. and I.R.S.Excluding* Hubs of 914 and 356 Sub kits are below for specific Porsche Models.Email with any questions.Pictures are for reference only.

Porsche Buyers Guide 10.75

About this title: Dean Batchelors classic Illustrated Porsche Buyers Guide is completely revised and updated by Randy Leffingwell, author of Porsche Legends. This edition includes all the new Porsches introduced since the 1989 third edition including the newest 911s, the incredible Boxster, the 959, and the 968. Porsche owners, prospective buyers, and enthusiasts who simply admire Porsche craftsmanship and performance will appreciate the details covered in the revised text with its buying tips and in depth information arranged year by year and model by model.

Flywheel Lock 22.95
215 Volkswagen Porsche Tool
Flywheel Lockused to secure the crankshaft from rotating during R&R of motor.
Used in conjunction with Engine Holding Fixture P201,
where Flywheel Lock bolts into a machined channel.
All Porsche and VW 6V or 12V, air cooled.Please note: This item is included in the complete kit also.
read more:

Hub Wheel Bearing R&R Kit 220.00

B90 Hub/Wheel Bearing R&R Kit 220.00

36mm Flare Wrench 42.50
Special 36mm Flare Wrench like vw 179.Oil Line 12 Point Wrench for servicing Oil Lineson most 1977 and Later Porsche 911 and 944 Turbo.This tool is also used for adjusting rear suspension heighton 77 and Newer Porsche 911and for camber on most late model Volkswagen Bug.
read more:

Set 3 Porsche Clutch Tools 13.99

Set of 3
Porsche Clutch Alignment Tools
Covers a BIG variety of Porsche Applications.
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.

Porsche Radio Removal Tools 8.99

Radio Removal Keys for Porsche
As good or better than the factory tools...
Please note the rubber on the handle for a better grip.
Appl: Turbo GT, GT2, GT3, Boxster,
Cayenne 911, 996 , 987, Carrera etc...
Same as Porsche ref: 000 721 957 01

NOTE : KEYS WILL ALSO WORK ON ALL NEWER MERCEDES
For Mercedes 1997 and newer.

Used to remove radio, (Becker) climate controls and Nav system.
Applicable most 97 and newer most
S, C, E, CL, SL, SLK, ML, G class vehicles.

944 Tool Set 60.50

Set of two tools for 944
Flywheel Lock needed to stop the motor from rotating during removal and replacement of crankshaft bolt or motor. Applicable: Porsche 944.

Alignment Pin ZDMAK number P218 Same as Porsche Tool 9215.
Alignment Pin crucial in order to properly reinstall the oil filter/water intercooler housing.
Not using this Alignment Pin may cause misalignment during this procedure, which may lead to the oil pressure relief valve sticking and ultimately engine damage.
Applicable: Porsche model 944 from 1983 to 1986.

Sprocket Holder 47.50

Same as Porsche Tool 9200Locking Bar needed to properly secure the balance shaft sprocketfrom rotating during R&R of retaining bolt.Applicable: Porsche 944.

Oil Seal Arbor Porsche 141.50

Arbor needed for the proper installation of oil sealon flywheel side of crankshaft. Applicable: Porsche model 911 '78 '94, 928, 944, 968.

Eccentric Adjuster 27.50

P221 Eccentric Adjuster Same as Porsche 9171Adjuster needed for Toe In of rear suspension.Applicable: Porsche model 911, 924, 944.

Set 2 Alternator Tools 47.00

Combo Socket Set of 2 consisting of the 17mm Multi Spline Adapter and XZN (12 Point) Socket size M10 for mounting and dismounting the alternator pulley at the generator.Volkswagen Audi Mercedes Porsche etc...For mounting the V belt pulley (slip clutch pulley) at the alternator (manuals call it a generator), especially for T.D.I. VW Golf III, Vento, Passat and AUDI A 3 .
The short serrated socket (3400) is size 17MM outside diameter and Length is 30mm.
The larger tool is M10 XZN triple square and is 1/2 drive x 140mm Length.Also for Boxster. (See repair Group 27 (Porsche Bulletins) Boxster Alternators with free wheeling Pulleys. High Quality Tool

Also: 1990 to 1994 porsche C2 and C4 and all porsche 993s use a (M10) 10mm 12point socket tool to hold the alternator shaft when replacing the belts the area between the alternator and car body is very limited a 10mm 12point spanner style wrench works well for this job.

944 Flywheel Lock 41.50

Flywheel Lock needed to stop the motor from rotatingduring R&R of crank shaft bolt or motor.Porsche Factory ref: 000 721 920 60Applicable: Porsche 944.

Door Handlle Hinge Kit 79.50
Tool Kit for BENZ , VW , AUDI , PORSCHE door hinge/handle installer & remover.
Finally, a compact solution to accessing the special features found on the door hinges and door handles of VW/Audi, Mercedes Benz and Porsche, includes 4 door hinge bits (less than 1 inch long) with slender ratcheting wrench and extra long drivers for accessing Mercedes and VW door handle fasteners.
read more:

Pulley/Fan Belt Pin Wrench 34.99

This Pulley Wrench is used for securing the generatorfrom rotating during R&R of pulley or fan belt.Applicable: Porsche model 9111975 and newer. (Please note: The Porsche ref. number for this item would be P208B)

Alignment Pin Drift 19.95

Same as Porsche Tool 9215Alignment Pin crucial in order to properly reinstall the oil filter/water intercooler housing.Not using this Alignment Pin may cause misalignment during this procedure,which may lead to the oil pressure relief valve sticking and ultimately engine damage.Applicable: Porsche model 944 1983 '86.

Special Adaptor Ring * 154.50

New Porsche Adaptor Ring
For the budget minded Porsche & VW air cooled engine rebuilder...Check it out.....
This Ring (same as the one equipped on the factory style Engine Holding Fixture P201)
is void of any holding or securing tubes.
This adaptor ring is specifically designed to mate the engine case straight to any universal engine stand, using four 3/8" Bolts,
thus allowing for a full 360 degree rotation of the engine.
This ring is designed to bolt up to every Porsche and VW fully dressed air cooled engine ever produced.
It is machined with all the necessary reliefs and/or notches to allow for clearance of all engine parts, including the flywheel and its respective lock tool (VW Flywheel lock 215). Call Zdmak 877 938 6657.

Best Seller ! Radio Tools Set 24.99

This is one of the best sets on the market. This is a Master Set for BMW Mercedes Porsche VW Audi and DIN. Included is a total of 3 different sets Volkswagen Audi, two different tools for BMWand a set for Mercedes Porsche and a DIN Ford set. The VW Tools (4) Number T10057Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box. If you have 4 slots VW AUDI this is the 4 keys you need) Plus you get Number VW 3316 (2) Radio Removal Tools New Body Style Passat Jetta Golf . You will get virtually full coverage forVolkswagen Audi when you buy this master set. The BMW Radio Removal Tools areone Pentagon shaped tool with a 3 5/8 inches overall length. Applicable: Most BMWs. This Five sided driver is used to release anti theft radio mounts.You will also get the special rare small allen tool for BMW (upper left) Fornewer BMW E38 & E39 7 SERIES Plus Mercedes most coverage for newer and oldervehicles, especially 1992 and newer 129, 140, 163, 202 & 210 PLUS Range Rover with Becker Nav System.The MB Tools also work on Porsche. Appl: Turbo GT, GT2, GT3, Boxster, Cayenne 911, 996 , 987, Carrera etc. Same as Porsche ref: 000 721 957 01

Spring Compressor (Intake) 59.99

Valve Spring Compressor (Intake) Porsche Number P7iDesigned for On The Car R&R of Intake valve springsw/o having to remove the motor or cylinder heads. Applicable: Porsche model 911 1965 '89

Spring Loaded Gauge 46.50

P228 Spring Loaded Gauge Spring Loaded Gauge Displays valve spring height using pre calibrated indicatorsstamped onto the outside surface of this tool. Crucial for accurate valve spring adjustment.Applicable: Porsche 911.Same as Porsche P10C

Ball Joint Pin Wrench Socket 55.95

Porsche Reference Number for this tool is P280B. ZDMAK Number P210
Pin Wrench Socket with 1/2" drive and a pin reinforcement sleeve,needed for the proper R&R of ball joint nutsw/o damage to the Pin Wrench Socket or nut.911 Porsche 1965 89912, 914

Heavy Duty 8mm Allen 27.95

Multiple applications for this handy tool.
Super Duty 8mm Allen Item P243 Extra Long 3/8 Drive SocketThis 8mm Extra Long Allen Socket is a solid one piece construction.Overall length is 7.75 inches.Used for R & R of some Benz Cylinder Headbolts,and some BMW C.V Joint Bolts,and Porsche Heat Exchange Exhaust sysetms 911 930 Porsche

Set 2 Tie Rod Tools 89.00

Set of 2 Pullers including:
Large Tie Rod Tool VW 1014 Separator used for disassembly of pitman arm type tie rod ends without tearing the ball joint boots. Opening size is 25mm. Most VW Audi & Late Porsche models.

PLUS *

Puller P266HX Separator used for disassembly of Pitman arm type tie rod ends without tearing the boots. Opening size is 18mm. Most VW Audi Late Porsche models.

Ribe Bit Set 19.99
Ribe Bit Set 3 Pc
6mm, 8mm & 10mm bits in 3/8" Sq.Dr. holders.
Especially for Porsche
read more:

Porsche Adjusment Kit 46.50
911 Adjusment Kit
3 Piece Adjustment Tool Kit
Designed to adjust the mechanical injection pump for performance emission tuning. Applicable 911 69 thru 73.
read more:

Bonus Triple Square Set 5 49.99

12 Point Headbolt Tools Plus Drain Plug Socket. (Anyone looking knows how hard it is to find a good price on XZN Tools here you have the extremely popular size 10 and more...)
The Headbolt Set of 4 Includes: 6mm, 8mm, 10mm & 12mm
with 3/8 Drive holders on a rail.
Plus you get
Drain Plug Socket (Upper Left)
Special Large size M16
(Notice the Tamperproof Center on the M16)
Drain Plug Socket Triple Square (12 Point = XZN )
For Porsche Boxster and Audi A4, A6 and Passat
A very handy set for the VW, Audi, Porsche and German car mechanic.

Note: The 4 pieces (Right) are regular XZN and the drainplug tool is tamperproof.
You will get all five pieces with this purchase.

Super Strong 30 X 32mm 27.50

Big Sucker! Metric Thin Wrench 32 x 36mm with just over a 1/4 inch (8mm) thickness and overall length of 13 1/2 inches for proper leverage. This is a STRONG BEEFY tool you will like. A very good tool for the experienced technician and should be one of the first items a new tech will purchase. All European auto techs need thin wrenches and this is one the best values on the market and it is a heavy duty tool that will pay for itself very quickly. For use on Oil Lines, Fan Clutch work, A/C and Transmission work. These thin wrenches are becoming more and more necessary every day. Some applications include: Mercedes and BMW R&R of fan clutch hub nut. The 32mm is used for R&R of tie rods Porsche model 911 Turbo, 1976 89and the 36mm is needed for proper adjustment of rear ride height Porsche 911 1977 89 etc...This item is on sale now.

Luxury cars most satisfying
Porsche topped J.D. Power's 11th-annual survey that measures performance, layout appeal and customer satisfaction with cars three months after they were driven off the dealers' lots.
read more:

Oil Seal Tool 42.50
Porsche Volkswagen Tool like 204BUsed for proper installationof oil seal on flywheel side of crank shaft. All VW Boxer 4.
read more:

Spring Clips 2.50
P241 Spring Clips like vw 171Used for securing cam followers within crank case half during assembly. Applicable: Porsche model 356, 912, 914.Every VW air cooled engine.
read more:

Heavy Duty Bench Clamp 187.50
313 Volkswagen Porsche Tool Designed for to securely carry the full weightof an air cooled twin turbo Boxer 6Tool Number VW 313Properly suited for a work bench.
read more:

Valve Adjustment * Deep Offset Wrench 5.99
German MadeDeep Offset 12 Point Spanner.This Exact item is no longer available from Germany.PORSCHE VW VALVE ADJUSTMENTTYPE 1, 2, 3 and 4 VOLKSWAGEN
read more:

Gauge Holder 37.00
Dial Gauge Holder P240 Used to properly measure crank shaft flywheel and pulley end play.Can also be universally to check clearances and run out.Applicable: Most Porsche and VW air cooled engine.
read more:

Golf Guard Pewter 96.99
Golf Guard Delux
. Large capacity: holds bags up to 11" in diameter and drivers up to 46" long . Key Lockable Latches with Protective Rib . Foam padded Interior to Protect Club Heads . Super Tough Wheels . 5 year warranty
This is Pewter color.
Also available in Black.
Dimensions 49.6" x 14.9" x 16.4"
read more:

Relief Valve Tool 30.50
P236 Pressure Relief Valve Extractor Extractor the proper extraction of the from engine case. All Porsche VW Boxer 4
read more:

Puller 27.99
P229X Distributer Drive Gear Puller Puller used for the proper extraction of the Distributer Drive Gearfrom engine case. All Porsche VW Boxer 4
read more:

Golf Guard Black 96.99
Golf Guard Delux
. Large capacity: holds bags up to 11" in diameter and drivers up to 46" long . Key Lockable Latches with Protective Rib . Foam padded Interior to Protect Club Heads . Super Tough Wheels . 5 year warranty
Picture is for reference only.
This is the Golf Guard in Black (color).
Also available in Pewter.
Dimensions 49.6" x 14.9" x 16.4"
read more:

Ferrari Magnetic Wrench 29.99
17mm Magnetic Box V WrenchUsed for securing the top engine bolts from rotatingduring R&R of motor from transmission.Applicable: Porsche, VW and Ferrari modelsusing 17mm connecting bolts with a Hex Head
read more:

Hazet Box Made in Germany 149.99
5 Tray Box
530 x 200 x 200mm.
Blue Stove Enameling
Super cool blue Hazet box Made in Germany for the Porsche and Volkswagen enthusiast.
read more:

Hose Clamp Plier 00
Pliers DBGM, with rotating jaws and multiple locking positions, single handed use even with wide openings due to variable geometry joint, especially for 12 and 15 mm wide, large format hose clips, e.g. for VW/Audi, Opel, Ford, Renault, Fiat, Peugeot, Citroen, Porsche, DaimlerChrysler, Alfa Romeo.
read more:

World Famous Assistent 775.00
Rolling Tool Box
Hazet World Famous Assistent
With collapsible swinging down pillars
to reduce the height to a space saving minimum (642 mm).
Super High Quality German made tool box number 166C.
The favorite of Porsche owners everywhere!
read more:

Flywheel Lock 00
Universal Flywheel Lock
Designed for use on all air cooled Volkswagen engines
Type 1, 2, 3, & 4 and on all air cooled Porsche engines
(series 356, 912, 914, & all 911s through 1969).
This tool is a must when changing a flywheel or its seal
and it comes in handy when changing a clutch.
Made from a forging, this quality tool will last a lifetime.
read more:

End Play Kit 00
This tool has isdesigned to measure the end play movement
of the VW crankshaft without the use of a dial indicator.
All that is necessary is a feeler gauge set and this tool.
With the tool bolted to the end of the case, the feeler guage
measures the gap created by the end play.
The taking of this end measurement is necessary whenever a VW engine is rebuilt
to prevent the rear main bearing from seizing up.
A must for rebuilding one engine or many,
this tool works on all air cooled VW engines and Porsche 912 & 914 models.
read more:

P220 Wrist Pin Tool 19.00

Wrist Pin InstallerApplicable: Porsche 914 4 912E

Professional Engine Holder Complete 550.00
Engine Holding Fixture Designed to securely carry the entire weightof a fully dressed air cooled twin turbo Boxer 6.Engine Holding Fixture will allow a full 360 degree rotation of engine,with Flywheel Lock allowing for R&R of engine.Bolts up to every Porsche and VW air cooled Boxer ever produced.From Type 1 up to 3.6LItems included in this kit are: P201, VW313 and VW215.
read more:

Oil Seal Arbor 115.00

Oil Seal Arbor Pulley Side of crankshaft Porsche 996 and Boxster

Camshaft Bar 84.50

Camshaft Tool Same as Porsche 9191Cam bar used to secure the camshaftfrom rotating during R&R of camshaft nut. Needed when adjusting valves or setting cam timing 911 (80 89)

Camber Adjustment Tool 19.50

Camber Adjuster (Eccentric Insert) extremely crucialwhen adjusting camber of front wheels. Applicable: Porsche 911 C2 & C4.

Locking Device 0

vw521/4 Locking Sleeve for measuring backlash to be used in conjunction with guage holder vw387.
Applicable most Porsche models. Check your manual for details.

You Searched for

PORSCHE CLUB

Trade Links With ZDMAK